MC CH702 PID Temperature Controller Digital 72*72*65 0.5%FS

Hot price automatic MC CH702 multi LED Input signals economical pid heater temperature controller USE in Industrial

CH series intelligent (temperature) display apparatus using 8-bit single chip as the core, has high precision and strong anti-jamming performance, high reliability, a variety of sensor input freely, shorter dimension design at the same time, the control method that contains both relay output and solid state relay output, use more convenient and efficient seller

Specification

Product synopsis:

The product for the new type temperature controller, it can implement high precision control and the price is reasonable. Using large LED display, is suitable for the remote reading data, easy to monitor the temperature condition, standard models with the new correction function independently, can automatic correction PID frequently"The number. Heating/cooling model for digital communications (RS - 485), the temperature alarm, heater disconnection alarm (3 phase heater is available) control loop disconnection alarm functions are availableJapan RKC waalwijk thermostat (loop controller) CD901, CD701, CD501, CD401, CH402, alkane, REX - C900 C700, C410, C400, alkane, F900, F700, F400, equipped with a large number of spot. Strong technical force, can provide customers with a variety of different types of input, output, alarm, procedures, and other types of products.

PID control the measuredPID controller can adaptively adjust than columns, the action of integral, differential and integral calculus so that the system has less overshoot the advantages of strong adaptability, short adjust time customer service the shortcomings of traditional PID controller

Silver point relay. Pure copper transformer. Mechanical SMT process 0 high precision chip

Widely used fit a variety of equipmentCan control all dayMechanical temperature control the oven temperature control incubation temperature controlling greenhouse cultivation and so on

Instructions :

Set the SV modelIn the SV/PV display normally, press the "SET" to SET key, the SV display in a blink state, by pressing the "shift", find the number of bits SET temperature, and then press "add" or" "Reduce key, SET to the required temperature, SET to end, SET the press" SET "key to confirm again, make the instrument returns to the SV/PV according to normal state.

Parameter setting modeThis parameter is used to set the alarm, the parameters such as PID constants. In normal display mode, long press "SET" key SET after three seconds, in the PV display shows the parameter setting state, in the SV display show its corresponding numerical, in turn, press "SET" key and showing the symbol table parameters. SET up by a "SET" key to save the data, more than three seconds long press "SET" key to exit the setup state.

Note:

This machine has showed automatic reply function. When the operator to set parameters of the modified operation and forget to return to the main display mode, the instrument will automatically return to the main display mode after 30 seconds.Instrument before use or modifying parameters carefully read the following content.The following process each content such as instrument without this feature will not display the content.