|
[China]
Trade Verify
Address: B/B,Shayi Dongjiang Huanbao Industrial City,Shajing Street,Shenzhen City,China
Contact name:Yuna Qin
SZ PUFENG PACKING MATERIAL LIMITED |
|
Verified Suppliers
|
|
|
PORON Waterproof Quakeproof Urethane Japan Foam Pad Gasket
With variety of density lineup, this series corresponds various application, such as seals, vibration and shock absorption.
| Type | Thickness (mm) | Function | Hardness | Color | Density (JIS K 6401) | Tensile strength (JIS K 6251) | Elongation (JIS K 6251) | Tear strength (JIS K 6252) | 25% CLD (JIS K 6254) | Compression set (JIS K 6401) |
|---|---|---|---|---|---|---|---|---|---|---|
| LE-20 | 2.0～6.0 | - | Soft | Black | 200kg/m3 | 0.30MPa | 150% | 1.3N/mm | 0.02MPa | 7.9% |
| L-24 | 3.0～15.0 | - | Soft | Black | 240kg/m3 | 0.54MPa | 115% | 1.8N/mm | 0.04MPa | 2.7% |
| L-32 | 1.5～6.0 | - | Normal | Black | 320kg/m3 | 0.77MPa | 150% | 2.4N/mm | 0.08MPa | 3.4% |
| H-24 | 3.0～12.0 | - | Normal | Black | 240kg/m3 | 0.88MPa | 150% | 2.8N/mm | 0.08MPa | 3.3% |
| H-32 | 1.5～6.0 | - | Normal | Black | 320kg/m3 | 1.44MPa | 155% | 3.3N/mm | 0.14MPa | 3.1% |
| H-48 | 0.45～4.0 | - | Hard | Black | 480kg/m3 | 2.35MPa | 140% | 6.2N/mm | 0.25MPa | 5.9% |
| HH-48 | 0.8～6.0 | Color(Other than Black) | Hard | Black | 480kg/m3 | 2.65MPa | 140% | 7.4N/mm | 0.39MPa | 4.7% |
This series materials are low-outgassing and flame-retardant (UL94 HBF, FMVSS No.302). They are safety and friendly to the environment.
| Type | Thickness (mm) | Function | Hardness | Color | Density (JIS K 6401) | Tensile strength (JIS K 6251) | Elongation (JIS K 6251) | Tear strength (JIS K 6252) | 25% CLD (JIS K 6254) | Compression set (JIS K 6401) |
|---|---|---|---|---|---|---|---|---|---|---|
| ATR-32PR | 1.0～5.0 | Heat-Resistant Water Proof・Water Seal | Normal | Black | 320kg/m3 | - | - | - | 0.10MPa | 6.0% |
| ATR-24PR | 2.0～5.0 | Heat-Resistant Water Proof・Water Seal | Soft | Black | 240kg/m3 | - | - | - | 0.06MPa | 6.0% |
| ATR-32 | 1.0～5.0 | Heat-Resistant Water Proof・Water Seal | Normal | Black | 320kg/m3 | 0.42MPa | 85% | 1.4N/mm | 0.10MPa | 6.0% |
| ATR-24 | 2.0～10.0 | Heat-Resistant Water Proof・Water Seal | Soft | Black | 240kg/m3 | 0.28MPa | 95% | 1.0N/mm | 0.06MPa | 6.0% |
| MS-40 | 0.9～4.0 | Flame-Retardant(UL 94) Heat-Resistant Low VOC | Soft | Black | 400kg/m3 | 0.51MPa | 130% | 2.1N/mm | 0.06MPa | 3.0% |
| ML-32 | 1.5～6.0 | Flame-Retardant(UL 94) Low VOC Color(Other than Black) | Normal | Black and white | 320kg/m3 | 0.68MPa | 110% | 2.1N/mm | 0.07MPa | 2.0% |
| MH-32 | 1.5～6.0 | Flame-Retardant(UL 94) Low VOC | Normal | Black | 320kg/m3 | 1.20MPa | 110% | 2.9N/mm | 0.13MPa | 3.0% |
| NU-60 | 0.7～1.2 | Low VOC | Hard | Black | 600kg/m3 | 1.30MPa | 150% | 5.5N/mm | 0.21MPa | 2.9%*4 |
| TR-24 | 2.0～10.0 | Heat-Resistant Low VOC | Soft | Black | 240kg/m3 | 0.29MPa | 86% | 1.1N/mm | 0.03MPa | 0.5% |
| TR-32 | 1.0～5.0 | Flame-Retardant(UL 94) Heat-Resistant Low VOC | Normal | Black | 320kg/m3 | 0.41MPa | 87% | 1.7N/mm | 0.07MPa | 0.5% |
| CH-32 | 1.5～6.0 | Flame-Retardant(UL 94) Low VOC | Normal | Black | 320kg/m3 | 1.30MPa | 110% | 4.0N/mm | 0.14MPa | 2.9% |
| CH-48 | 0.8～5.0 | Flame-Retardant(UL 94) Low VOC | Hard | Black | 480kg/m3 | 2.00MPa | 120% | 6.2N/mm | 0.31MPa | 2.4% |
| RX-32 | 2.0～8.0 | Flame-Retardant(UL 94) Heat-Resistant | Soft | Black | 320kg/m3 | 0.50MPa | 72% | 1.8N/mm | 0.06MPa | 2.5% |
PET film body molding technology realizes a thinner foam with a low resilience and contains additional features, such as flame-retardant properties. This series can satisfy any fields of customer needs.
| Type | Thickness (mm) | Hardness | Color | Density (JIS K 6401) | Tensile strength (JIS K 6251) | Elongation (JIS K 6251) | Tear strength (JIS K 6252) | 25% CLD (JIS K 6254) | Compression set (JIS K 6401) |
|---|---|---|---|---|---|---|---|---|---|
| SR-S-15P | 0.5～2.0 | Soft | Black | 150kg/m3 | - | - | - | 0.006MPa*1 | 1.0% |
| SR-S-20P | 0.3～0.4 | Soft | Black | 200kg/m3 | - | - | - | 0.008MPa*1 | 1.6% |
| SR-S-24P | 0.7～3.0 | Soft | Black | 240kg/m3 | - | - | - | 0.008MPa | 2.7% |
| SR-S-32P | 0.2～2.0 | Soft | Black | 320kg/m3 | - | - | - | 0.011MPa | 2.2% |
| SR-S-40P | 0.4～1.5 | Soft | Black | 400kg/m3 | - | - | - | 0.015MPa | 2.0% |
| SR-S-48P | 0.3 | Soft | Black | 480kg/m3 | - | - | - | 0.022MPa | 2.0% |
| SR-S-70P | 0.15～0.2 | Soft | Black | 700kg/m3 | - | - | - | 0.016MPa*2 | 4.0%*4 |
| SR-S-15PN | 0.5～1.0 | Soft | Black | 150kg/m3 | - | - | - | 0.005MPa*1 | 1.5% |
| TSR-15P | 0.5～1.0 | Soft | Black | 150kg/m3 | - | - | - | 0.007MPa*1 | 1.0% |
| SR-N-15P | 0.5～1.0 | Soft | Black | 150kg/m3 | - | - | - | 0.007MPa*1 | 2.0% |
| SR-U-40P | 0.5～1.0 | Soft | Black | 400kg/m3 | - | - | - | 0.015MPa | 4.0% |
| ASRS-40PA | 0.4～1.0 | Soft | Black | 400kg/m3 | - | - | - | 0.020MPa | 2.0% |
| SS-24P | 1.0 | Soft | Black | 240kg/m3 | - | - | - | 0.007MPa | 1.6% |
| SS-32P | 0.5 | Soft | Black | 320kg/m3 | - | - | - | 0.010MPa | 2.0% |
| WP-24P | 0.5～2.0 | Soft | Black | 240kg/m3 | - | - | - | 0.022MPa | 4.2% |
| WP-32P | 0.3～2.0 | Soft | Black | 320kg/m3 | - | - | - | 0.051MPa | 4.9% |
| WP-40P | 0.3～2.0 | Normal | Black | 400kg/m3 | - | - | - | 0.071MPa | 5.7% |
| MS-40P | 0.4～1.0 | Soft | Black | 400kg/m3 | - | - | - | 0.054MPa | 3.0% |
| MS-40PR | 0.5～1.0 | Soft | Black | 400kg/m3 | - | - | - | 0.064MPa | 2.0% |
| MH-48P | 0.3 | Hard | Black | 4 ,80kg/m3 | - | - | - | 0.284MPa | 4.0% |
| EXT | 0.1 | Soft | Black | 900kg/m3 | - | - | - | 0.007MPa*2 | 6.8%*4 |
While maintaining the same basic characteristics, we have added a series with new features, like high friction, high slidability and high surface strength, through special surface treatment.
| Type | Thickness (mm) | Hardness | Color | Density (JIS K 6401) | Tensile strength (JIS K 6251) | Elongation (JIS K 6251) | Tear strength (JIS K 6252) | 25% CLD (JIS K 6254) | Compression set (JIS K 6401) |
|---|---|---|---|---|---|---|---|---|---|
| SR-S-15PN | 0.5～1.0 | Soft | Black | 150kg/m3 | - | - | - | 0.005MPa*1 | 1.5% |
| MS-40PR | 0.5～1.0 | Soft | Black | 400kg/m3 | - | - | - | 0.064MPa | 2.0% |
| CH-32EG | 1.5～6.0 | Normal | Black | 320kg/m3 | 1.30MPa | 110% | 4.0N/mm | 0.14MPa | 2.9% |
| CH-48EG | 0.8～4.0 | Hard | Black | 480kg/m3 | 2.00MPa | 120% | 6.2N/mm | 0.31MPa | 2.4% |
| MX-40EG | 0.8～5.0 | Hard | Black | 400kg/m3 | 3.83MPa | 95% | 10.7N/mm | 0.92MPa | 3.5%*4 |
| MX-48EG | 0.8～3.0 | Hard | Black | 480kg/m3 | 4.58MPa | 81% | 9.7N/mm | 1.26MPa | 4.5%*4 |
| MX-48HF | 0.8～3.0 | Hard | Black | 480kg/m3 | 4.24MPa | 80% | 10.0N/mm | 1.37MPa | 8.0%*4 |
| HH-48C | 0.8～6.0 | Hard | Black | 480kg/m3 | 2.65MPa | 140% | 7.4N/mm | 0.39MPa | 4.7% |
| MS-40T | 1.0 | Soft | Black | 400kg/m3 | 0.89MPa | 170% | 5.2N/mm | 0.06MPa | 3.0% |
| LE-20LF | 2.0～6.0 | Soft | Black | 200kg/m3 | 0.30MPa | 150% | 1.3N/mm | 0.02MPa | 7.9% |
The Foot Pad series includes materials with a comparably high hardness grade. This grade is specifically for foot rubber.
| Type | Thickness (mm) | Hardness | Color | Density (JIS K 6401) | Tensile strength (JIS K 6251) | Elongation (JIS K 6251) | Tear strength (JIS K 6252) | 25% CLD (JIS K 6254) | Compression set (JIS K 6401) |
|---|---|---|---|---|---|---|---|---|---|
| HH-48 | 0.8～6.0 | Hard | Black | 480kg/m3 | 2.65MPa | 140% | 7.4N/mm | 0.39MPa | 4.7% |
| CH-32EG | 1.5～6.0 | Normal | Black | 320kg/m3 | 1.30MPa | 110% | 4.0N/mm | 0.14MPa | 2.9% |
| CH-48EG | 0.8～4.0 | Hard | Black | 480kg/m3 | 2.00MPa | 120% | 6.2N/mm | 0.31MPa | 2.4% |
| MX-40EG | 0.8～5.0 | Hard | Black | 400kg/m3 | 3.83MPa | 95% | 10.7N/mm | 0.92MPa | 3.5%*4 |
| MX-48EG | 0.8～3.0 | Hard | Black | 480kg/m3 | 4.58MPa | 81% | 9.7N/mm | 1.26MPa | 4.5%*4 |
| MX-48HF | 0.8～3.0 | Hard | Black | 480kg/m3 | 4.24MPa | 80% | 10.0N/mm | 1.37MPa | 8.0%*4 |
| HH-48C | 0.8～6.0 | Hard | Black | 480kg/m3 | 2.65MPa | 140% | 7.4N/mm | 0.39MPa | 4.7% |
A high-performance shock-absorbent series with cushioning and shape traceability properties making it ideal for applications such as shoe insoles and sports pads.
| Type | Thickness (mm) | Hardness | Density (JIS K 6401) | Tensile strength (JIS K 6251) | Elongation (JIS K 6251) | Tear strength (JIS K 6252) | 25% CLD (JIS K 6254) | Compression set (JIS K 6401) |
|---|---|---|---|---|---|---|---|---|
| TM-20 | 2.0～5.0 | Soft | 200kg/m3 | 0.99MPa | 171% | 3.3N/mm | 0.05MPa | 2.4% |
| TM-15 | 2.0～5.0 | Soft | 150kg/m3 | 0.81MPa | 166% | 2.7N/mm | 0.035MPa | 2.2% |
| TG-24 | 3.0～5.0 | Normal | 240kg/m3 | 1.21MPa | 120% | 3.3N/mm | 0.08MPa | 1.2% |
| BB-32 | 3.0～5.0 | Soft | 320kg/m3 | 0.20MPa | 50% | 0.8N/mm | 0.06MPa | 4.0% |
| FW-27 | 2.0～3.0 | Normal | 270kg/m3 | 1.00MPa | 120% | 2.5N/mm | 0.08MPa | 4.5% |
| FW-27EG | 2.0～3.0 | Normal | 270kg/m3 | 1.00MPa | 120% | 2.5N/mm | 0.08MPa | 4.5% |
Can be used as the optimal secondary water sealant for waterproofing material in public construction, civil engineering, and household equipment.
| Type | Thickness (mm) | Hardness | Color | Density (JIS K 6401) | Tensile strength (JIS K 6251) | Elongation (JIS K 6251) | Tear strength (JIS K 6252) | 25% CLD (JIS K 6254) | Compression set (JIS K 6401) |
|---|---|---|---|---|---|---|---|---|---|
| WA-20 | 5.0～20.0 | Soft | Black | 200kg/m3 | 0.26MPa | - | 1.01N/mm | 0.030MPa*3 | 1.0% |
| WA-H-20 | 10.0～20.0 | Soft | Black | 200kg/m3 | 0.36MPa | - | 1.36N/mm | 0.045MPa*3 | 1.0% |
.
Our Services
1. Your inquiry related to our product will be replied within 12 hours.
2. OEM or ODM projects are highly welcome.
3. We can die cut or design the products according to your requirements.
4. Perfect after-sale service offered,please contact us if you got question.
5. Packing as your request and promptly delivery
FAQ
1) How to order from PUFENG?
Just send us email or call us.
2) Do you offer the free sample for testing?
Yes, we offer thee samples for free.
3) How to ship the order?
We will suggest you the appropriate way of shipment, by sea, by air or by courier. Of course if you will have your own forwarder, that is no problem.
4) Can we trust the quality of product from PUFENG?
Sure, do not worry about that. Our quality wills absolutely compliance to the sample we send. If not, we will take charge of that.
5) What payment PUFENG accepts?
For the small quantity, we request 100% advanced TT payment; other conditions, negotiable.
6) How about the lead time of per order?
If the tape you order have stock, we can ship out within 1~3 days.
If die-cuts requested, the lead time shall be according to the quantity.
