New Release VAG Cable VAGCOM 12.12.3 is latest version in the
market, it has only English language, works with Windows XP, WIN7,
WIN8, provide most convenience for your operation.
VAG Cable VAGCOM 12.12.3 VAG Diagnostic Cable for VW / AUDI / SKODA
/ SEAT
Newest Update VAG COM 12.12.3 is the first afable tool with any
support at all for VW Crafter vans, and of course compatibility
with all the latest 2013 model VW/Audi Group passenger cars.
Top 5 Reasons to Get VAG 12.12.3 Cable:
1. VAG 12.12.3 diagnostic cable works with Windows7, WindowsXP, and
32-bit, 64-bit
2. VAG 12.12.3 has a database of more than 14000 fault-codes and
measuring-block texts.
3. Can use the new 7-Digit PIN/SKC codes to match new keys in all
immobilizer equipped VW/Audi/Seat/Skoda models. Allows you to view,
log, and graph 3 groups of Measuring Blocks at once
4. Can access all control modules which require proprietary VAG
modes running the KWP-2000 protocols (2001+ Teves Mk.60 ABS,
numerous 2002+ modules), KWP6000 (CAN) and/or KWP7000 (UDS)*.
5. Can display critical timing information on TDI engines in
graphic form
VAG 12.12.3 Diagnostic Cable Additional Improvements:
1. New, more universal Airbag Coding Assistant. Works with the
latest airbags which use Index-Based coding and provides tips where
to find the Index.
2. New "Upload Debug/Log File" function in Applications Dialog to
make it easier for users to send data needed to answer their
support queries.
3. Increased size of Auto-Scan logs which can be saved. We've had
reports of cars with so many faults in various control modules that
the old limit was reached which resulted in incomplete logs.
4. Many other small fixes and enhancements not worth mentioning
individually here.
5. Completely revised and expanded ROD (ODX) Data. Including
coverage for all the latest models of cars such as the new
4G-chassis Audi A6. The structure of our ROD data has also been
revised to eliminate much redundancy and keep the installer size
reasonable.
6. Support for new UDS addresses required for compatibility with
new systems found in latest car models.
7. Auto-Scans now show sub-system label file names.
8. EDC15-16 Mileage reading now includes support for some EDC15 V6
TDI ECUs.
9. Revised and expanded Label Files More than 350 new or revised
files since the last dataset.
10. New USB Drivers. Now compatible with the latest PCs which use
Fresco Logic USB3 chipsets.
VAG 12.12.3 Diagnostic Cable Software Installation Instructions:
-Download the self-installing distribution file available below.
-Run it and follow the prompts to allow it to install itself.
-You must install VCDS on your PC's hard disk!
-It may not work properly if you try running it directly from other
media.
-However, you can use other media such as a CD or USB memory key to
move the distribution file from a PC with internet access to
another PC that does not have internet -access.
-Connect an appropriate interface between the computer and the car.
-Turn the car's ignition switch ON. No need to start the engine.
-Start the VCDS program:
-Click [Options] and select the correct communications port.
-Use [Test] to confirm that the program can use the port and find
the interface.
-Then [Save].
-Now Play. Make sure the software can reliably access all the
control modules that it should in your car. See our Application
Charts. Query Fault Codes from some modules.
-Please check back frequently for updates! If you want to be
notified of updates via e-mail, please subscribe to the
VAG-COM-Announce mailing list.
Installation Notes:
1. VAG 12.12.3 works with Windows 2000, XP, Vista, 7, 8, and 8.1
(both 32-bit and 64-bit)
-Windows 95, 98, ME, and NT4 are no longer supported.
2. VAG 12.12.3 must be used with a HEX-, KEY-, KII-, or Micro-CAN
"high-tech" Interface.
-It does not work with any third-party interfaces or some of our
older "low-tech" interfaces.
-If you're a registered user and have an older low-tech interface,
you should consider ourinterface upgrade program.
-If you're not ready for an interface upgrade, you'll have to use
VCDS-Lite instead.
3. The default installation folder is C:Ross-TechVCDS
-It is essential NOT to install in the Program Files tree in on
systems running Windows Vista or 7.
4. Driver Versioning Issue:
-The "Standard" USB drivers in Release 12.12 are older than the
ones that came with Release 11.11.0 (which were less than 100%
reliable on some PCs). When you install the drivers that come with
this version, Windows may complain that they are older than the
ones which are already installed. If that happens, you must answer
"Yes" when asked if you want to replace the files anyway.
5. To remove other old versions:
-Versions prior to Release 704, simply delete the shortcuts from
your Start menu andDesktop and delete the folder(s) where the
program was installed..
-Release 704 and newer may be uninstalled using Windows' Add/Remove
Programs or by running theuninstall.exe program found in the folder
with the version that you wish to remove.
Package Including:
1pc x VAG 12.12.3 Cable
1pc x CD