Guillotine Type PCB Separator Machine with Part Count Capacity

Best Selling Guillotine Type PCB Separator Machine Cutting Aluminum Board

1. Pneumatically driven and electric control , sample design . There have sensor device in the machine , cuttting board one time with lowest cut stresses . SM-4000 apply for separate precise SMD PCBA or thin plates .

2. The straight knife type separator machines were designed to separate pre- scored panel boards carefully , without bending or tension stress . Even sensitive SMD components like ceramic capacitors will not be damaged by the separate process , improve products quality .

3. Due to the special design of the blade , boards with high components placed close to the edges can be separated safely . Based on a proven method of separating, wedge shaped knives are used to cut the panels within the groove . This enables boards of less than 1 mm thickness to be separated safely and without creating stress. 

Fetures:

1 , No vibration during the process to prevent damage to precise PCB
2 , Gap for insertion of the board can easily be adjusted by means of the adjusting knob in the top side of the machine , low friction design is applied .

3 , Lower knife height adjustable, the front and real portion can be adjusted separately . No thin plates are required after re-sharpening the knife .

4 , Operation and maintenance can be done also by unskilled personnel

Specifications :