Active Member
|
[China]
Address: 101-201，Building 4，No.1 Branch of Zhongcheng Life Science Park, No. 14 Zhongxing Road, Xiuxin Community, Kengzi Street Office, Pingshan District, Shenzhen, China
Contact name:wenly
Shenzhen Yurucheng Dental Materials Co., Ltd |
|
|
1600C dental ceramic sintering furnace for zirconia
Dental Zirconia Sintering Furnace Featrues
1. Automatic Lifting up and down
2. High temperature chamber material, resistance high temperature 1700 ℃
3. Programmable controlled,after sinter, the tray will automatic come down to reduce whole heating time
4. 7" Larger Touch panel with PC interface
Technical parameters of dental zirconia sintering furnace
| Rated voltage/frequency | 220V±10%/50HZ |
| Rated power | 2000W |
| Maximum load temperature | 1600 ℃ |
| Protection level | IP21 |
| Fuse | 1) 2x~380V 16A 2) 250V 0.5A 3) 250V 1A |
| Fast fuse | ~500V 32A |
| Net weight | 62kg |
| Size | 515*320*620mm |
Precautions for sintering Furnace Use
1.Cut off the power when the furnace is not in use.
2. clean the furnace every two months.
Clean Furnace Method:
1. Break waste zirconia (white zirconia) into small pieces of 5-10 mm size.
2. Take 4-6 pieces and place them in the sintered plate (inside the crucible), cover the lid, then take 8-10 pieces and place the sintered plate in the middle of the furnace.
Sintering program:
room temperature----10℃/ min heating rate-heating to 1600℃-----insulation for two hours-------natural cooling.
Burn repeatedly until the white zirconium color permeability is normal and the furnace is clean.
