Dental Lab Diamond Burs Orthodontic Dental Polishing Burs of Rotary
Instruments
Domineering Burs can be used for preparing teeth and breaking the crowns
Germany Imported Bearing
The three-point spray method on the end face makes the atomization
cooling more sufficient, and the pressure mist design makes the
water and air atomization to be affected by the pressure as little
as possible
The head shell adopts integrated processing, it's not easy to be
deformed
All the key components that are easy to wear are made of
medical-grade stainless steel with reliable processing performance
and durability
The O-shape ring used on the core is oil resistant, high and low
temperature resistant, which can meet the requirements of multiple
high temperature and high pressure disinfection without deformation
Inlet pipe installed with anti-blocking device
Dustproof sanitary machine head
Quantity | 1 Piece CRK Diamond Burs Working Time |
1 Tooth | 2.5 minutes |
10 Teeth | 25 mimutes |
20 Teeth | 60 minutes |
Full Mouth( 28-32 Teeth) | 90 minutes , it can keep working |
Instructions
New burs break the crown every minute, but we don’t recommend
breaking the crown directly. It will waste the effect of the burs
When the teeth are prepared after about 10 pieces, you can feel the
burs are suddenly not sharp, that is time for the fine grinding.
Break the crown now, the sharpness of the bur is maximally used ,
saving the doctor's time and relieving the pain of the patient.
The correct way to disinfect the bur is to soak in acid for 5-10
minutes, rinse with water and sterilize at high temperature.
Do not let the burs soak in acid for a long time, which will cause
acid corrosion, which will change the nature of the material and
make the burs become less durable and easy to be broken