Active Member
|
[China]
Address: 2nd Floor,1st Building,West Area,Honghualing Industrial Park,No.88,North Zhuguang Rd,Nanshan District,Shenzhen,China
Contact name:Mr Kain
Shenzhen Xiangtong Co.,Ltd. |
|
|
Technical Data
| Name | X-Mill 600 Milling Machine |
| Dimension | 1110x820x1820(mm) |
| Net weight | Approximately 850kg |
| Input voltage | Single phase AC 220V |
| Max power | 6.5kw |
| Spindle power | 2.5kw |
| Axis quantity | 5 |
| Milling range | XYZ:320/130/150mm A: 360° B:±36° |
| Milling mode | Wet milling |
| Max speed | 60,000 rpm |
| Max feeding speed | XYZ: 6000 mm/min |
| Bur capacity | 12 |
| Bur changing | Automatic |
| Cooling | Water cooling |
| Materials | CoCr/NEM , titanium , PMMA , wax , glass ceramics , hybrid ceramics . |
| Milling time | Crown:30 min Abutment:50min Bar:2h |
Q & A
1. Why do you think your machine is able to mill hard metal ?
This machine is based on a gantry structure, which is build on the cast iron , and equipted with 2.7 kw Indutry Spindle
2. What materials are able to be milled by this machine ?
It can mill Titanian Blank , Non - precious metal , Co - Cr metal , Hybride Ceramic
3. How long bridge it can mill ?
This machine B rotate can reach 35 Degree , so almost any case can be milled with it .
4.Which software is it using ?
Normally, We supply customres with Hyperdent , but also we can provide Worknc , MillBox
