Air cooled chiller screw type150TR with heat pump ASWC-HA153
Cooling Capacity 150TR;
R134agas with heat pump;
One compressor design;
1.Nominal cooling condition: water outlet 7℃ ,air intake 35℃ .
2.Nominal heating condition: water outlet 45℃ ,air intake
7℃ DB/6℃ WB.
3.Partial heat recovery highest water outlet temperature 55℃
.
4.Max input power is 1.25 times of the nominal input power
DEKON High efficiency screw compressor heat pump is with advanced
gear type
design, high precisely machined and high volumetric efficiency;
utilization of branded
fluorine endurance motor in the compressor resulted in high
efficiency in different
working conditions.
Apply strengthened heat transfer technology to enhance heat
transfer efficiency of
evaporator and condenser, which could increase the evaporating
temperature and
reduce the condensing temperature. Thanks to that the COP is
improved obviously.
Optimize the refrigerant phase and flow rate. Higher heat transfer
efficiency
thanks to un-match arranging of heat exchange tube.
Patented double stage liquid equivalent device distributes the
refrigerant evenly
and has higher heat transfer efficiency.
Apply high efficient heat exchange tube increasing the heat
transfer efficiency 15%.
Adopt optimized inverted “M” shaped structure, which could improve
the air
flow and the ventilated efficiency to avoid air mass interfering
each other. More
equality air distribution realizes a higher heat exchange
performance.
Unique and un-matched refrigerant circuit could adapt the change of
refrigerant
phase and increase the heat exchange rate.
R22 gas air cooled screw chiller series
R22 Air cooled Screw chiller Series with heat recovery functions
R407c Air Cooled Screw Chiller Series
R407c Air cooled Screw Chiller Series With Heat Recovery Functions
Air cooled Screw Chiller R134a gas
Air cooled Screw Chiller R134a with Heat Recovery Functions
Air cooled Chiller Screw type with R134a gas for Tropical weather
conditions
