Active Member
|
[China]
Address: No. 12, Chuangxing Road, Baisha, Humen Town, Dongguan, Guangdong, China
Contact name:Calin Deng
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. |
|
|
Metal Panel Forming Machines, Punch Feeders, Hydraulic Feeders, hydraulic rim press machine, punching machine
Definition type: Punch feeder is also called automatic air feeder. It is divided into various models. There are special floor-type pneumatic feeders, left and right yaw shifting pneumatic feeders, rodless pneumatic feeders, etc. Introduced to the main.
The main features of the punch feeder are as follows:
1. Pneumatic feeder is suitable for automatic processing of various large size materials
2. The use of electromagnetic cutting (electronic control variable)
with micro-switch control can make the feeding time early or
delayed. The movable tripod can be used to match the height of the
punching machine and the shearing machine.
3. Easy installation, safe operation, easy operation, low failure
rate and accurate feeding accuracy.
BNC Roller Feeder Features: Through CCS (Computer Control Servo
System), high-precision numerical control is realized in the past.
Quick and accurate operation can be done simply.
There are often some minor faults when using the feeder, and the
servo feeders generally have the following five types of faults:
1. The feeding error has a fixed direction. There are several
reasons for this problem: the pressure of the feeding roller is
insufficient; the feeding length is too long or too short; the mold
has burrs or foreign objects.
For different solutions, increase the pressure, the width of the
coil and the appropriateness of the mold guide plate, or whether
the tool and the NC feeder are in line, check the baffle and the
stripper.
2. Sudden error during feeding. In this case, the NC feeder has an
error in the adjustment of the material. Whether the leveling
machine and the servo feeder match or the distance between the leveler and the NC feeder and
the height of the material arc Whether the number of revolutions of
the punch is appropriate or not, and the transmission gap between
the roller and the servo motor is relatively large. At this time,
just tighten the belt of the pulley.
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi
