GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. |
|
The unique back-and-forth yaw shifting feeding mode of the servo
feeder can minimize the scraps generated during stamping
production, improve the production efficiency, and improve the
material utilization rate, especially suitable for the production
of wafers.
NC servo feeder is a wide range of feeders driven by servo motor.
Its advantages are: easy operation, high feeding accuracy,
multi-stage feeding, convenient feeding length, maximum feeding
length up to 9999.99mm.
The air feeder and the roller feeder can do this, and the NC feeder can do the same. It is widely used in the stamping industry of
automobiles, electrical appliances, computer accessories, wide
shelf materials and long feeding steps.
Here you still have to tell you that the servo feeder can only feed
in one straight line, and when it is used in the blanking
production of the punching machine, there will be a lot of scraps,
which will cause great material waste.
Therefore, the yaw feeder is a new type of machine specially developed for the processing of
wafer blanking. When it is used with the punching machine, it can
be fed straight or moved back and forth.
And only need to set the yaw angle and yaw distance to
automatically achieve the purpose of round and round cutting when
cutting. Relatively speaking, production costs can be effectively
controlled.
Specification:
Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
Power(V) | 3 Phase 220V/380V/50HZ | |||||
Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straigtening performance:
tock Thicknees (mm) | Stock Width (mm) | |||
0.3 | 400 | 500 | 600 | 800 |
0.4 | ||||
0.6 | ||||
0.8 | ||||
1.0 | ||||
1.2 | ||||
1.4 | ||||
1.6 | 470 | 470 | ||
1.8 | 400 | 400 | ||
2.0 | 360 | 360 | ||
2.3 | 300 | 300 | 300 | 300 |
2.5 | 230 | 230 | 230 | 230 |
2.8 | 150 | 150 | 150 | 150 |
3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi