GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. |
|
For stamping with a single die, it is usually not necessary to
equip the press with automated feeding equipment. However, the
press feeder is an indispensable device when using a progressive
die for continuous press processing.
Although the NC servo feeder has stable performance and convenient
operation, it is relatively high in price because it needs to be
fed by servo motor. It cannot be accepted by most customers. At
this time, the roller feeder has high precision, low failure and
easy maintenance. It does not require additional energy and other
advantages to become the most used feeding equipment in the
stamping industry.
In actual use, fix the roller feeder with the mounting plate on the side center of the die on the
punching table, fix the relaxation device on the slider, and let
the loosening screw just press the extension of the relaxation
bracket, and use the eccentric disk for the eccentric disk. The
mount is mounted on the punch output shaft.
Then connect the connecting rod, the rocker arm and the body, and
adjust the material thickness, feeding time, feeding distance and
relaxation of the roller feeder according to the width and
thickness requirements of the material, and then perform the
inching test and the single-action test. After that, high-precision
continuous automated production is possible.
Specification:
Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
Power(V) | 3 Phase 220V/380V/50HZ | |||||
Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straigtening performance:
tock Thicknees (mm) | Stock Width (mm) | |||
0.3 | 400 | 500 | 600 | 800 |
0.4 | ||||
0.6 | ||||
0.8 | ||||
1.0 | ||||
1.2 | ||||
1.4 | ||||
1.6 | 470 | 470 | ||
1.8 | 400 | 400 | ||
2.0 | 360 | 360 | ||
2.3 | 300 | 300 | 300 | 300 |
2.5 | 230 | 230 | 230 | 230 |
2.8 | 150 | 150 | 150 | 150 |
3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi