GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. |
|
Pneumatic NC servo feeder is the most convenient automatic feeding
equipment in the stamping industry with the most stable
performance, the highest feeding precision, the most suitable
equipment, and the easiest installation and commissioning.
It is widely used in the stamping industry, and it is also the most
used feeder type for stamping owners. The pneumatic NC servo feeder produced by Ruihui Machinery is one of the best.
Ruihui pneumatic NC servo feeder has better performance advantages
than other manufacturers' feeders:
1. When the punch presses the plate, the pneumatic cylinder uses
the force of the air pressure to move the piston downward.
Therefore, when the pneumatic cylinder moves downward, the spiral
arm is pulled by the fixed shaft, so that the spiral arm is tilted
downward by an angle. .
At the same time, the clamping roller is moved upward by the
principle of eccentricity of the eccentric shaft to prevent the
roller from feeding back the NC servo motor due to the reverse
rotation of the plate punching, which causes the NC servo motor to
calculate the feeding progress error and affect the accuracy of the
feeding.
2. Each time the stamping is performed, the pneumatic cylinder can
be automatically restored to the original position. With the
adjustment of the reference line of the pneumatic cylinder
according to the thickness of different metal plates, it can have
the function of returning to zero at any time.
It can effectively prevent the unnecessary collision between the
feeding roller and the clamping roller, generate noise, and make
the feeding process more precise.
3. When changing the plate for different thickness for stamping
processing, it can be adjusted by another pneumatic cylinder. When
the pneumatic cylinder is raised, the arm can move the feeder
roller downward by the eccentric wheel.
In order to achieve different distances for adjusting the thickness
of the sheet, the user can adjust the distance of the rise of the
pneumatic cylinder according to the different thickness of the
material, and the operation is quite easy.
4. Not only can the calculation of the NC servo motor be more
accurate, but also the pneumatic cylinder can be adjusted
immediately when adjusting the thickness of the feed, which is
quite convenient in operation.
When the Ruihui NC servo feeder is actually used, the distance,
speed and number of feedings are set on the independent electric
control box. Then, the servo motor drives the driven gear through
the belt through the driving roller to drive the driven roller to
rotate the driving roller. .
The plate can be fed to the pinch roller and the active roller
according to the preset distance and speed. When the punch presses
the plate, the pneumatic cylinder uses the force of the air
pressure to move the piston downward.
Therefore, when the pneumatic cylinder moves downward, the arm is
pulled by the fixed shaft, so that the arm is tilted downward by an
angle, and the pinch roller is moved upward by the principle of
eccentricity of the eccentric wheel.
Preventing the roller from feeding back the NC servo motor due to
the reverse rotation of the plate stamping, which causes the NC
servo motor to calculate the feeding progress error and affect the
accuracy of the feeding;
When the NC servo feeder performs a stamping, the pneumatic
cylinder can be automatically restored to the original position,
which has the function of returning to zero, which makes the
feeding process more precise.
Furthermore, when the thickness of each sheet is changed, it can be
adjusted by another pneumatic cylinder. When the pneumatic cylinder
is raised, the arm can be moved downward by the eccentric pulling
the driving roller.
In order to achieve different distances for adjusting the thickness
of the sheet, the user can adjust the distance of the rise of the
pneumatic cylinder according to the different thickness of the
sheet, the feeding precision is high, the stability is good, and
the operation and use are extremely simple.
Specification:
Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
Power(V) | 3 Phase 220V/380V/50HZ | |||||
Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straigtening performance:
tock Thicknees (mm) | Stock Width (mm) | |||
0.3 | 400 | 500 | 600 | 800 |
0.4 | ||||
0.6 | ||||
0.8 | ||||
1.0 | ||||
1.2 | ||||
1.4 | ||||
1.6 | 470 | 470 | ||
1.8 | 400 | 400 | ||
2.0 | 360 | 360 | ||
2.3 | 300 | 300 | 300 | 300 |
2.5 | 230 | 230 | 230 | 230 |
2.8 | 150 | 150 | 150 | 150 |
3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi