Active Member
|
[China]
Address: No. 12, Chuangxing Road, Baisha, Humen Town, Dongguan, Guangdong, China
Contact name:Calin Deng
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. |
|
|
Ruihui gear feeder are changed from the traditional two-wheel dual-drive mode to
the four-wheel four-wheel drive mode. Compared with the traditional
gear feeder, it has three significant advantages:
1. Since the feeding drive system adds the second roller set and
the second gear combination excessive gear set, the two sets of
roller sets all play the driving role, forming four-wheel
four-wheel drive, and the friction coefficient of the roller
surface can be controlled, thereby greatly improving Feed line
speed.
2. Improve the feeding ability of the material to be sent by the feeder, such as the
material to be sent in the width of the material, and the conveying
capacity of the material to be sent in the range of 0-1 mm.
Moreover, the feed line speed is not affected by these materials.
3. Due to the use of high-precision grinding gears, the
transmission error is reduced. The hollow roller is used to reduce
the quality and inertia of the feeding transmission system, improve
the feeding accuracy, achieve higher speed feeding and improve
production efficiency.
Since the surface of the roller is processed, the wear resistance
of the roller is increased, the friction coefficient is increased,
and the driving force of the roller is larger and it is not easy to
slip. For the extra-wide material to be fed, the contact area
between the roller and the sheet material is increased, thereby
improving the jog braking performance of the feeder and reducing
the sliding distance of the material to be conveyed.
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi
