Active Member
|
[China]
Address: No. 12, Chuangxing Road, Baisha, Humen Town, Dongguan, Guangdong, China
Contact name:Calin Deng
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. |
|
|
The three-in-one feeder should have high degree of automation,
leveling, good feeding precision, high synchronization performance
and easy operation.
The advantages of greatly saving labor costs and floor space have
won the favor of more and more stamping customers, and are
considered to be the most advanced automatic feeding device in the
industry.
With the increase in demand, there are more and more manufacturers
engaged in the production of three-in-one feeders, but the quality
that comes with them has also been mixed, especially in design and
production. problem.
Ruihui talks about the reason why the three-in-one feeder feeds the run:
1. The rollers are not in the same heart. In the leveling or
feeding part, one side is sewn and the other side is sewn to lead
out. If the three-in-one roller is not the same, it is a big
problem. It is a problem with the feeder.
2. The pressing device is different in tension, the adjusting
material wheel is not adjusted correctly, and the width of the
adjusting guide wheel in the feeding part of the feeding is not
adjusted to a suitable size, and the width of the discharging wheel
is not adjusted to an appropriate size.
If the three-in-one feeder unwinding part of the material blocking device, the feeding wheel
of the flat feeding part, and the feeding wheel of the feeding and
discharging are not adjusted well, if it is too wide, it will
easily go wrong.
3. the positioning of the mold tip is not done, it is very likely
that the positioning of the mold.
4. There is a problem with the material guiding device of the material frame, and the design is unreasonable. The irrationality of this design can easily lead to accidents. This means that the guiding device is not doing well. The design is not reasonable.
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi
