GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. |
|
The leveling feeder will inevitably have some faults during
operation. Here is a brief explanation of the general faults:
First, the relaxation device is not smooth
1. Check if the positioning guide pin in the mold is normal, check
and correct it carefully.
2. There is an offset in the feeding direction to check whether the
working direction is correct or not.
3. The eccentric shaft and the loose shaft lose oil and are cleaned
with kerosene and filled with butter.
Second, the feeding has no regularity error
1. Check whether the pressure plate is evenly stressed and adjust
the pressure of the relaxation device.
2. If the feeding mechanism is pneumatically relaxed, check if the
pressure of the air compressor is normal.
3. Check whether the coils fed into the material rack are on the same level as the feeder and mold.
Third, sudden errors occur when feeding
1. Whether the leveling machine is matched with the NC feeder, or
whether the intermediate distance between the leveler and the
feeder and the material arc height and punching speed are
appropriate.
2. Adjust the belt properly and check whether the length, width and
thickness of the coil are standard.
Specification:
Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
Power(V) | 3 Phase 220V/380V/50HZ | |||||
Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straigtening performance:
tock Thicknees (mm) | Stock Width (mm) | |||
0.3 | 400 | 500 | 600 | 800 |
0.4 | ||||
0.6 | ||||
0.8 | ||||
1.0 | ||||
1.2 | ||||
1.4 | ||||
1.6 | 470 | 470 | ||
1.8 | 400 | 400 | ||
2.0 | 360 | 360 | ||
2.3 | 300 | 300 | 300 | 300 |
2.5 | 230 | 230 | 230 | 230 |
2.8 | 150 | 150 | 150 | 150 |
3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi