GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. |
|
As the highest-end stamping automation equipment, NC servo feeders
have been used for many years abroad. The NC servo feeder is a new
automation device designed for the messy stamping process.
Compared with the roller feeder, it has a very significant advantage. It can complete the feeding
of multiple steps in the same stamping technology on one punching
machine to meet the diversified production needs of customers.
The production line consisting of its punching machine is called
the short-flow stamping automatic production line because of its
small footprint and simple work flow. It has gradually replaced the
split-type stamping production line share to become the mainstream
production line of the foreign stamping market.
The feeding parameters of the NC servo feeder are controlled by the
customer's free touch screen programming. The operation is simple
and the function is high. The electronic control system composed of
the servo motor has the highest feeding accuracy, high
applicability and reliability.
1. a variety of relaxation methods are available for selection,
satisfaction is not the same as customer needs:
There are two types of relaxation: pneumatic relaxation and
mechanical relaxation. Customers can choose according to their own
mold and stamping characteristics. At the same time, Lihao has a
mechanical and pneumatic relaxation integrated feeding machine
type, which can be used to complete two kinds of relaxation
methods. Switching, when the end of a machine is multi-purpose,
when replacing different goods and molds, it is not necessary to
purchase new feeding equipment from scratch, and fundamentally
reduce the production products.
2. intuitive and fast operation form:
The NC feeder adopts a 7-inch touch screen to adjust the button dual-control
operation method, which can set the feed parameters in a simple and
rapid manner.
3. The feeding step setting is not restricted:
The traditional roller and air feeder stepping range has a range of
use, while the servo feeder is completely free of any mechanical
constraints. It can be set between 0-10 meters through the touch
screen, which greatly improves the applicable range of the
equipment.
4. the unique feeding parameter storage function, fast and complete
the automatic production:
Multiple sets of feeding parameters can be stored in the feeder as
needed, and when the corresponding mold is replaced, it can be
directly called to greatly reduce the downtime debugging time.
Specification:
Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
Power(V) | 3 Phase 220V/380V/50HZ | |||||
Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straigtening performance:
tock Thicknees (mm) | Stock Width (mm) | |||
0.3 | 400 | 500 | 600 | 800 |
0.4 | ||||
0.6 | ||||
0.8 | ||||
1.0 | ||||
1.2 | ||||
1.4 | ||||
1.6 | 470 | 470 | ||
1.8 | 400 | 400 | ||
2.0 | 360 | 360 | ||
2.3 | 300 | 300 | 300 | 300 |
2.5 | 230 | 230 | 230 | 230 |
2.8 | 150 | 150 | 150 | 150 |
3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi