Active Member
|
[China]
Address: No. 12, Chuangxing Road, Baisha, Humen Town, Dongguan, Guangdong, China
Contact name:Calin Deng
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. |
|
|
NC feeder frame, Jiangsu stamping chilled steel plate thickness 3mm, Ruihui robot
The feeder is fixed and installed, and has a simple structure, is convenient and practical, and thus has been widely used. Compared with the air feeder and the roller feeder, the NC feeder has a wider application range and can be used for various plates with a material width of 0-2000 mm and a material thickness of 0-6.0 mm.
The fixed frame of the NC feeder consists of a main frame, a support table, a support plate, a support column, a flange, a shock absorbing ring, etc., wherein the upper part of the main frame is a pair of support platforms distributed in a space, 2 The support table is a support plate fixed to the support table.
The NC feeder body is arranged on the upper part of the support plate, and the outer wall of the support table is provided with a uniformly distributed support column. The outer end of the support column is provided with a support column flange, and the support column flange is positioned by the support column connection plate, and the support column A damping ring is arranged between the support platform and the support body and the support column are matched and fixed, and the body of the feeder is matched with the shock absorbing ring.
The left end and the right end of the main frame are respectively provided with reference fixing holes, and the reference fixing holes are located at the outer end of the support table, and the support plate is provided with a body fixing bolt fixed to the body of the feeder.
Ruihui's NC feeder with fixed rack has stable performance and high reliability, which fundamentally eliminates the vibration and instability during the operation of the fuselage, and fundamentally ensures the high precision and super high speed of the feeder. Stability also greatly enhances the scope of application of the NC feeder.
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi
