Heavy Material Rack Discharging Nc Feeder Equipment Material Thickness 6.0mm

 
Heavy material rack discharging equipment, material thickness 6.0mm, Dongguan Ruihui nc feeder
 
1. The heavy-duty material frame is a vertical (up and down reel) discharging equipment. The applicable material thickness range is 0-3.0mm. After adding the pneumatic pressing arm and other optional devices, the applicable material thickness can reach 6.0mm. The width can be from 10 to 1600mm depending on the model, and the range of material width and material thickness is extremely wide.
 
2. The heavy-duty material frame adopts the tension-type reeling barrel tensioning and discharging method. It is necessary to put the coil material into the expansion and contraction reel and fix it in order to use it. Therefore, there is a requirement for the inner diameter. Ruihui Heavy-duty material frame standard MT- The inner diameter of 200 is 380-530mm, and the models of MT-300 and above are 450-530mm (both made by the national standard material roll inner diameter 508mm).
 
3. heavy material rack can only put one roll at a time.
 
4. The standard of heavy-duty material frame adopts 24V induction frame induction mode. When the automatic operation requires material to contact the induction rod (induction frame) to stop, it will start to run after leaving the induction rod, and the surface of the material may be scratched. Switch to photoelectric sensing mode).

 
Specification:
 

Straigtening performance:
 

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi