GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. |
|
3-in-1 feeder, auto parts stamping, stamping and feeding equipment
1. 3 in 1 feeding machine block arm is divided into front and rear
sides, you can adjust the position of the material. The front
baffle arm has two actions of swinging up and down and moving back
and forth; the rear baffle arm only moves back and forth.
2. Adjustment of the front arm: adjust the front arm of the front
arm by adjusting the hand arm to press it inward, let it clamp the
outer adjustment shaft, and then turn the hand wheel.
Up and down swing adjustment: When the manual valve is hit to the
rising position, the front arm will swing upwards, and the manual
valve will hit the down position before the arm will swing to the
lower position. When the manual valve hits the middle position, the
front arm will stop. pancake machine
3. Adjustment of the rear arm: Pull the hand arm of the gear arm
outward, let it clamp the inner adjustment shaft, and then turn the
hand wheel to adjust the back and forth movement of the back arm.
Products:
Specification:
Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
Power(V) | 3 Phase 220V/380V/50HZ | |||||
Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straigtening performance:
tock Thicknees (mm) | Stock Width (mm) | |||
0.3 | 400 | 500 | 600 | 800 |
0.4 | ||||
0.6 | ||||
0.8 | ||||
1.0 | ||||
1.2 | ||||
1.4 | ||||
1.6 | 470 | 470 | ||
1.8 | 400 | 400 | ||
2.0 | 360 | 360 | ||
2.3 | 300 | 300 | 300 | 300 |
2.5 | 230 | 230 | 230 | 230 |
2.8 | 150 | 150 | 150 | 150 |
3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi