Vertical Material Rack Straightening Machine , Coil Feeder Metal Material Stamping

Stamping automation, vertical material rack, metal material stamping

In the automatic stamping production line, the vertical material frame is usually used as the winding equipment. The light material frame and the heavy material frame are commonly used. Because both of them use a shrinking and shrinking barrel to receive the material, when the roll is completed, it needs to be The roll is moved to the specified location.

At this point, the entire production line machine needs to be stopped first, and then the manual cutting method is adopted, that is, the material roll is manually removed from the material rack and transported to the designated position, which is not only labor-intensive but also has low operation efficiency.

If the double-head material frame is used as the receiving equipment, the production efficiency can be fundamentally improved. The Ruihui double-head material frame has two expansion and contraction cylinders, and the two expansion and contraction cylinders can alternately perform the receiving work, and the The top is a spiral arm that supports the block.

The material roll can be conveniently pushed to the corresponding arm by a pushing mechanism provided on the material frame, and then the arm is rotated to the discharge area.

The material can be conveniently lifted to the designated position of the discharge area by the hook into the set card slot, and the manual rotation of the spiral arm to the designated position is required in the middle, which does not require a lot of manpower, and effectively improves the material volume transfer. effectiveness.

The Ruihui double-head material frame is composed of a base, a frame, a rotating shaft, a motor and an electric box, wherein two receiving spindles are evenly mounted on the rotating shaft, and the two receiving spindles are symmetrically arranged with the turntable as the center and the central axes coincide.

The receiving main shaft is provided with an arc-shaped supporting block, and the top of the supporting block has a circular arc shape to match the inner round material tube of the material roll. After the supporting rod and the supporting block are combined, a card slot is opened in the middle, and the card slot divides the supporting block into The symmetrical two halves constitute the expansion and contraction cylinder, and the structure of the double expansion and contraction cylinder ensures that the double-head material frame realizes the purpose of rapid unloading production without stopping.

Products:

Specification:
 

Straigtening performance:
 

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi