Steel plate roll material straightening machine, material frame
stamping, parts feeder
The hydraulic heavy-duty material frame is a common supporting
facility for heavy-duty stamping production lines. It has two
functions. One is to support the material by tensioning the inner
diameter of the coil material; the other is to drive the material
through the rotation of the main shaft of the rack. Feed into the
follow-up machine (leveler or feeder).
The completion of the tension is achieved by pushing the lever with
the cylinder mounted with the spindle; the completion of the
rotation is achieved by the motor rotating the spindle through the
reducer.
The cylinder mounted on the main shaft of the rack should run
synchronously with the main shaft, and the two cylinders of the
cylinder end need to be connected to the hydraulic station.
Therefore, a special device is required to realize one end of the
fixed end.
Improvement of heavy material shingles
The expansion and contraction reel of the heavy-duty material frame
consists of four tiles, leaving gaps between the plates for
expansion and contraction. Ordinary heavy-duty material shingles
are long straight seams. During operation, it is found that due to
the large curvature of the steel strip tail, the gap between the
shingles is often inserted, and the shingles are hooked, causing
damage to the equipment.
When designing and producing heavy-duty material racks, Ruihui
Machinery changed the tile to the scraped staggered tile. The tile
and the tile are interdigitated and interlaced, and the length of
the staggered straight seam is less than the minimum bandwidth,
which avoids damage to the material frame by the tailings.
Specifications:
Model | MAC4-600F | MAC4-800F | MAC4-1000F | MAC4-1300F |
Stock Width(mm) | 70~600 | 70~800 | 70~1000 | 70~1300 |
Stock Thickness(mm) | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 |
Max.Coil Weight(kg) | 5000 | 5000 | 7000 | 10000 |
Max.Coil O.D.(mm) | 1400 | 1400 | 1400 | 1400 |
Coil I.D.(mm) | 508 | 508 | 508 | 508 |
Feed Length(mm) | ~500* | ~500* | ~500* | ~500* |
Max.Line Speed(m/min) | 16~24 | 16~24 | 16~24 | 16~24 |
Work Roll Number(piece) | upper 6/lower 5 | upper 6/lower 5 | upper 6/lower 5 | upper 6/lower 5 |
Feed Roll number(set) | 1 | 1 | 1 | 1 |
Main Motor | AC7.5 | AC11.0 | AC11.0 | AC11.0 |
Mandrel Expansion | Hydrauilc | Hydrauilc | Hydrauilc | Hydrauilc |
Reel Motor(kw) | 2.2 | 2.2 | 3.7 | 7.5 |
Power(v) | 3 Phase 220V/380V/50HZ |
Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straightening Performance:
Model | MAC4-600F | MAC4-800F | MAC4-1000F | MAC4-1300F |
Stock Thickness (mm) | 0.8~2.3 | 600 | 800 | 1000 | 1300 |
2.8 | 933 | 933 |
3.2 | 714 | 714 | 714 |
4.0 | 457 | 457 | 457 | 457 |
4.5 | 361 | 361 | 361 | 361 |
5.0 | 293 | 293 | 293 | 293 |
6.0 | 203 | 203 | 203 | 203 |
Products:
1. Pre-Sales Service:We have professional designers to meet the
different requirement of our customers.
2. After-Sales service:We have an efficient team to meet 24*7 all
day service.
3. Full-Service:Actively cooperate with customers to deal with
problems in equipment using.
4. Engineers can provide service machinery overseas.