Lightweight High Torque CNC Stepper Driver Running Stable For Hybrid Stepper Motor

40V DC 2 phase stepper motor driver controller for Hybrid Stepping motor,apply to laser machine,

SWT-203MS stepper motor driver

1:Introduction

1. This driver is suitable for the two-phase hybrid stepper motor that drives the phase current at less than 3.2 A.

2. Applying technology of constant flow chopping and noise absorption inhibition to make sure the stepping motor system with high reliability, compact size, light-weight, high efficiency, running stable, high  torque.

2:Wiring description

1. CP+(CW+): External controller +5V output

2. CP-(CW-) :External controller pulse signal output(CW  pulse output)

3. DIR+(CCW+) :External controller +5V output

4. DIR-(CCW-): External controller pulse signal output(CCW pulse output)

5. FREE+:External controller +5V output

6. FREE- :External controller reset output(Motor loses power and low potential  effective)

7. A:  Motor A phase

8./ A: Motor A phase

9.B: Motor B phase

10./B: Motor B phase

11. GND: Negative pole

12. DC≤40V: Positive pole

3: Dimensions

Attentions:

Check detailed parameters on the housing.

3.Please turn the switch 6 to OFF before use(SW6=1)

Our SMT production