Active Member
|
[China]
Address: HongKong, Jiulong
Contact name:Barrey
HK Romiter Group Limited |
|
|
Apart from the general steel nails, our newly developed high speed automatic nail making machine with low noise generation also can manufacture special shaped nails such as linoleum nails, roofing nails, double cap nails, U-shaped nails, twist nails, concrete nails, etc. This equipment consists of lubricating system and driving system. The driving system covers wire feeding, wire clamping, cutting, and stamping.
Z94-1C automatic nail making machine can produce 450 pieces of nails per minute. All those nails come with the length ranging from 9mm to 25mm.
Parameters
| Model | Z94-1C | |
| Max. Diameter of Nail (mm) | 1.6 | |
| Min. Diameter of Nail (mm) | 0.9 | |
| Max. Length of Nail (mm) | 25 | |
| Min. Length of Nail (mm) | 9 | |
| Designed Output (pcs/min) | 450 | |
| Motor Power (Kw) | 1.5 | |
| Weight (approx) (kg) | 560 | |
| Overall Dimensions (mm) | 1440x1040x1270 | |
| Price (USD/UNIT) | 3000 |
Z94-2C automatic nail making machine is used to manufacture 16mm to 50mm long nails. Its production rate is 350 pieces per minute.
Parameters
| Model | Z94-2C |
|
| Max. Diameter of Nail (mm) | 2.8 | |
| Min. Diameter of Nail (mm) | 1.2 | |
| Max. Length of Nail (mm) | 50 | |
| Min. Length of Nail (mm) | 16 | |
| Designed Output (pcs /min) | 350 | |
| Motor Power (kw) | 2.2 | |
| Weight (approx) (kg) | 1200 | |
| Overall Dimensions (mm) | 1645x1215x1345 | |
| Price (USD/UNIT) | 4000 |
Z94-4C automatic nail making machine is specially designed for making the nails with the length from 2inch to 4inch. The production output is 280 pieces per minute.
Parameters
| Model | Z94-3C |  |
| Max. Diameter of Nail (mm) | 3.4 | |
| Min. Diameter of Nail (mm) | 1.8 | |
| Max. Length of Nail (mm) | 75 | |
| Min. Length of Nail (mm) | 30 | |
| Designed Output (pcs/min) | 320 | |
| Motor Power (kw) | 3 | |
| Weight(approx) (kg) | 1400 | |
| Overall Dimensions (mm) | 1800x1260x1460 | |
| Price (USD/UNIT) | 4500 |
Z94-4C automatic nail making machine is specially designed for making the nails with the length from 2inch to 4inch. The production output is 280 pieces per minute.
Parameters
| Model | Z94-4C |  |
| Max. Diameter of Nail (mm) | 4.5 | |
| Min. Diameter of Nail (mm) | 2.8 | |
| Max. Length of Nail (mm) | 100 | |
| Min. Length of Nail (mm) | 50 | |
| Designed Output ( pcs / min) | 280 | |
| Motor Power (kw) | 4 | |
| Weight (approx) (kg) | 2000 | |
| Overall Dimensions (mm) | 2000x1560x1450 | |
| Price (USD/UNIT) | 5500 |
Z94-5.5C automatic nail making machine whose production rate is 180 pieces per minute is designed for making the nails of 80mm to 150mm long.
Parameters
| Model | Z94-5.5C |  |
| Max. Diameter of Nail (mm) | 5.5 | |
| Min. Diameter of Nail (mm) | 3.7 | |
| Max. Length of Nail (mm) | 150 | |
| Min. Length of Nail (mm) | 80 | |
| Designed Output (pcs /min) | 180 | |
| Motor Power (kw) | 5.5 | |
| Weight(approx) (kg) | 2500 | |
| Overall Dimensions (mm) | 2380x1580x1660 | |
| Price (USD/UNIT) | 6500 |
Z94-6.5C automatic nail making machine designed for manufacturing the 100mm to 200mm long nails can produce 160 pieces per minute.
Parameters
| Model | Z94-6.5C |  |
| Max. Diameter of Nail (mm) | 6.5 | |
| Min. Diameter of Nail (mm) | 4.5 | |
| Max. Length of Nail (mm) | 200 | |
| Min. Length of Nail (mm) | 100 | |
| Designed Output (pcs /min) | 160 | |
| Motor Power (kw) | 11 | |
| Weight(approx) (kg) | 5000 | |
| Overall dimensions (mm) | 3200x2200x2200 | |
| The price (USD/UNIT) | 18200 |
In the nail making process, our equipment has the auxiliary machines like wire reel, nail cutter grinder, and nail polishing machine. The main wearing parts are nail mold, nail knife, and punch pin.
Production Principle
This equipment covers one main crank and two side shafts. Due to the special bearing design, it is smoother in operation as compared to the traditional nail making machine. The main axle is directly driven by the motor. In addition, the two side shafts separately used to control the nail cutter part and nail mold part are pulled via four bevel gear.
Production Process
The wire on the wire wheel will be fed to the working center through the wire roller of the nail making machine, and then the nail head is formed via the stamping of the punch pin after the nail mold clamps the wire tightly. After loosened by the nail mold, the wire will be driven to cutting center through the side shaft. Later, the nail will be cut into the set length. Finally, the finished nails will be automatically eject through the ejector.
Parameters
Model | Z94-6.5C | Z94-5.5C | Z94-4C | Z94-3C | Z94-2C | Z94-1C |
Max. Diameter of Nail (mm) | 6.5 | 5.5 | 4.5 | 3.4 | 2.8 | 1.6 |
Min. Diameter of Nail (mm) | 4.5 | 3.7 | 2.8 | 1.8 | 1.2 | 0.9 |
Max. Length of Nail (mm) | 200 | 150 | 100 | 80 | 50 | 25 |
Min. Length of Nail (mm) | 100 | 80 | 50 | 30 | 16 | 9 |
Designed Output (pcs/min) | 160 | 200 | 260 | 320 | 350 | 450 |
Motor Power (Kw) | 11 | 5.5 | 4 | 3 | 2.2 | 1.5 |
Weight (Approx) (Kg) | 5000 | 2500 | 2000 | 1400 | 1200 | 560 |
Overall Dimensions (mm) | 3200* | 2800* | 2200* | 2000* | 1700* | 1500* |
 |  |
| Wire Reel It is used for the wire coil laying | Nail Cutter Grinder It is used for grinding the nail knife by the grinding wheel. |
Nail Polishing Machine
This machine is used for polishing the nails, caps, etc. After put into the roller, the finished nail will be free from sharp edges and greasy dirt after having been rolled together with the sawdust for about 1 hour. Then, use the sieve plate to separate the sawdust and nails. The nail could become brighter and anti-rust after polishing.
Parameters
| Type | SD-400 | SD-600 | SD-1000 | SD-2000 |  |
| Capacity | 400kg | 600kg | 1000kg | 2000kg | |
| Power of Motor | 3kw | 4kw | 7.5kw | 11kw | |
| Overall Size | 1640 *90 *1000 | 1960 *1070 *1400 | 2000 *1500 *1400 | 2500 *1500 *1600 |
Sample
Maintenance
1) Ensure the cleanness of the automatic nail making machine, and
the nail mold should be frequently washed. Do not use the rusty
wire for nail making.
2) Be sure the well lubrication of the nail making machine before
starting. Especially for the new nail making machine, frequently
lubricate the machine parts with oil, grease.
3) Regularly use the nail cutter grinder to grind the nail knife.
4) When operating the machine, you should always pay attention to
the unusual noise as well as the temperature changes of the
frictional parts.
