Dalian Dahui Science & Technology Development Co., Ltd |
CK5116 cnc cutting machine
Description:
CK5116 lathe is cnc cutting machine aimed at processing inner round and outer round of large workpiece and plane. The cnc cutting machine is suitable for high-speed steel and hard alloy steel cutter, processing black metal, non-ferrous metal and some non-metallic materials. The following process can be finished with the cnc auto lathe: rough and fine turning of the inner and outer cylinder, plane and conical surface, grooving, severing and simple surface.
Main structure:
1.Stand column:
The stand columns are divided into two main and auxiliary rails at left and right. The cnc cutting machine can be more stable at run time, more rigid when strong cutting because the span between the main and the auxiliary guide rail becomes large and 55 degrees forked tail on one side of the main rail can be oriented.
2. The main drive system:
The main transmission gets power from 30KW three-phase asynchronous machine or continuous current dynamo. From belt to gear box, through two grades infinitely variable speeds, then the spiral bevel gear changes 90 degrees, the skewed tooth put the gear ring and the worktable into rotation. The wheel gear in the gear box quenching, grinding, gets high transmission accuracy and transmission efficiency, and reduces transmission vibration and noise.
3.Workbench part:
The workbench part is constituted by the workbench, the main spindle and the workbench base.The worktable rotation and load-bearing consist of hydrostatic slideway and two sets of 3,182,100 series bearings. The workbench embeds with zinc, aluminum and copper alloy guide rail board. Artificial scraping carefully can ensure the verticality with the main spindle, thus reducing the nonuniformity of shearing the oil film when rotating, ensuring the long-term stability of the lathe rotation accuracy.
4.Beam:
The ball screw, planetary reducer, servo motor in the crossbar constitute the left and right feeding system. The movement of the beam in the column is oriented by 55 degrees guide rail and platen.
5. Vertical Turret:
Vertical turret is composited with the rotary slide, ram, ball screw, planetary gear and servo motor. All sliding contact surfaces of the vertical turret are embedded with PTFE guide rail soft belt. In the case of full lubrication, it can significantly reduce the friction, reduce vibration, avoid the creeping phenomenon generated in the process of feeding.
6. Operation:
The cnc cutting machine has a separate console. The console has the operation buttons of the full machine. The operators can focus on operating the machine at the button station.
7. Hydraulic pressure and lubricating:
The cnc cutting machine hydraulic pressure system is divided into two pressure degrees. High pressure is used for workbench floating. The overflow of oil of low pressure is for gearbox lubrication, helical gear lubrication and so on.
Specifications:
Name | Unit | CK5116 | Name | Unit | CK5116 |
Max. turning diameter | mm | 1600 | fast moving speed of knife rest(X axis Z axis) | mm/min | 2000 |
Max. height of workpiece | mm | 1000 | Level travel of vertical slide | mm | -20~915 |
Max. height of workpiece | t | 5 | Feeding series of knife rest(X axis Z axis) | step | no step |
Workbench diameter | mm | 1400 | Feeding range of knife rest(X axis Z axis) | mm/min | 0.1~2000 |
Workbench speed series | step | 16 step/two gears no step | Section height of knife carrier | mm | 32x32 |
Workbench speed range | r/min | 2.5~200 | Feeding alternating servomotor torque | Nm | 11/16 |
Max. workbench torque |