Warranty for Two Years!!!

Leading Manufacturer Supply Top Precision Multi-function Electronic Densimeter Instrument for Solids

DE-120M / DE-200M

------High-precision,Outstanding Performance, density resolution 0.0001 g/cm3,

Appropriate for Small Products.

Application:Powder Metallurgy,magnetic Materials,Hard Alloy,Rubber,Plastic,Wire and Cable,Laboratory,Institute of New Materials Researching and Testing.Field of quality management,cost control,formula researching and developing,density test of small products and high-precision products,research of material density.

Standards:According to the ASTM D792,ASTM D297,GB/T1033,GB/T2951,JIS K6268,ISO 2781,ISO 1183,GB/T208,JB/T7780 standards etc.

Density resolution of DE-120M is 0.0001 g/cm3. No need to open and close the lip with the unicase aluminum alloy board. It is more high-precision,convenient,speediness,hommization. Provide many measurement methods for porosity materials,such as saturation method and surface covering method. Density,open pore

volume,total porosity and porosity can be read. It can be used to automatically judge whether the sample is qualified or not,and prompt alarm. It has the function of top and bottom limitation,measuring the volume abrasion value DIN of rubber,measuring expansibility,measuring true density and performance density of powder,measuring oil content of oil bearing,and measuring ceramic desnsity and porosity.

Specification

Features

(1)No need to open and close the lid; Simple operation;Shorter time; According to the specification of new materials laboratory.

(2)Show the percentage composition of mixed samples for researching and developing new materials.

Also suitable for powder metallurgy,magnetic materials,ceramics,fireproofing materials,precious metal and so on.

(3)Automatically judge whether the sample is qualified or not;prompt alarm.

(4)Function of solution compensation.either water or liquid can be used as medium.

(5)Function of setting actual water temperature,measuring medium density,and water proof medium density.

(6)Function of setting aerostatic buoyancy compensation and the bound of density.

(7)Adopt the completed high-capacity measurement accessories with the transparent

injection mould sink,which can resist wear,fall off,and corrosion.

(8)Adopt the completed special windproof and dustproof cover,which makes the instrument convenient and durable.

(9)Interface of RS-232C is included.the printer of DE-40 will be available to connect PC with the instrument.

Standard Accessories:

Host,Sink,Test board,Tweezer,Thermometer,100G weight,Windproof and dustproof

cover,A set of measuring grain accessories,A set of measuring floating body

accessories,Power transformer

Measurement Procedure of Non-hydroscopicity Products:

(1)Place sample on test board to measure weight in air,and then press ENTER button to memory.

(2)Place sample into water to measure weight in water,and then press ENTER button to memory.

Density value is displayed.

Measurement Procedure of Hydroscopicity Products:

(1)Place sample on test board to measure weight in air,and then press ENTER button to memory.

(2)Place sample that did waterproof treatment into water to measure weight in water,and then press ENTER button to memory. Density value is displayed.