Home Companies Guangdong Hongtuo Instrument Technology Co,Ltd

Digital Electronic Gold Density Tester, Precious Metal Specific Gravity Tester DH-600K

Guangdong Hongtuo Instrument Technology Co,Ltd
Active Member

Contact Us

[China] country

Address: No2.,XinYa Road,The Third Industrial Park,DaLingYa Village,DaoJiao,DongGuan,China.

Contact name:zhong

Inquir Now

Guangdong Hongtuo Instrument Technology Co,Ltd

Digital Electronic Gold Density Tester, Precious Metal Specific Gravity Tester DH-600K

Country/Region china
City & Province dongguan
Categories Health Product Agents
InquireNow

Product Details

 

 

Digital Electronic Gold Density Tester, Precious Metal Specific Gravity Tester DH-600K

 

 

Application:

pawn broking, bank, jewelry shop, precious-metals recovery, jewelry factory, gemstone testing center,precious metals researching.etc.

 

In accordance with archimedes principle water buoyancy method, GB/T1423 of precious metals testing standard,and so on.

 

Combine Archimedes principle with micro electronic technique and adopt sensor imported from Germany,the purity can be calculated through measuring density of precious metals.features of no damage on sample,simple operation,fast and accurate

 

Distinguish and measure K value of gold,PT value of platinum,density value,purity percentage.

 


Features:

 

  • Quickly measure the purity of gold,platinum,and other precious metals.Distinguish if the object is fake or genuine.
  • No damage testing, cleaning and environmental protection.
  • Measuring just need 10 seconds,convenience,stabilization,and accuracy.
  • Multi-mode,gold mode,platinum mode,other precious metals mode can be shifted..
  • Multi-function;the purity of other precious metals can be measured.such as tin,copper,silver.etc.also it can be used as precision balance.
  • Function of top and bottom limitation,it can display OK,HI,LO in the state of qualified,exceed,less.Prompt alarm.
  • Function of automatic zero tracking,buzzer warning,and overload warning.
  • Function of solution compensation.Either water or other liquids can be used as medium.
  • Adopt the completed high-capacity measuring accessories with the transparent injection mould tank,which can resist wear,fall off,and corrosion.
  • Adopt the completed special wind and dust cover,which makes the structure convenient and durable.
  • Interface of RS-232C is included.the printer of DE-40 will be available to connect PC with machine

 

Measurement procedure:

 

a)Place sample on testing board to measure weight in air,press ENTER key to memory.

b)Place sample into water to measure the weight in water,press ENTER key.the K value of gold,purity percent,density value will be displayed.

 

Standard accessories:

 

Host,tank,test board,tweezer,thermometer,weight,wind and dust cover,a set of measuring particle parts,a set of measuring floating body parts,power transformer

 

Specification table:

 

ModelDH-300KDH-600KDH-900KDH-1200KDE-120KDE-200K
Maximum weight300g600g900g1200g120g200g
Weight resolution0.005g0.005g0.01g0.01g0.001g0.001g
Density resolution0.001g/cm3
Measuring time10S
Testing boardCompleted high-capacity plastic testing board
Measuring typeTraditional gold and platinum jewelry,necklace,bracelet,ring,large bullion,craft,and gold,silver,copper,cadmium,nickel,tin.etc.

 

 

 

 

Gold mode

 

Display k value

The K value of mixture of gold,silver,and copper;

The K value of mixture of gold and copper;

The K value of mixture of gold and silver;

 

Display purity percent

The purity percentage of mixture of gold,silver and copper; ;

The purity percentage of mixture of gold and copper;

The purity percentage of mixture of gold and silver;

K value range9K~24K
Copper and silver proportion settingCycle seting(default 7:3)
Testing errorDefault as ±1K;also can be set up as 0.1K,0.01K,need to confirm with factory firstly

Platinum

Mode

Display valuePT percent,density value,volume
PT value rangePt600 - Pt1000
Other Precious MetalsFunctionOnly for DA series and DE series:measure the purity percentage of main materials in two kinds of mixture
Display valueOnly for DA series and DE series:density value,volume,content precentage
settingOnly for DA series and DE series:density value of main materials and secondary materials setting
Measuring container

completed injection forming transparent professional measuring tank

(size:length16.9mm×wide9.8mm×high8.3mm)

Parameter settingwater temperature setting,measuring medium density setting
principleArchimedes principle
Memory methodTwo procedures
Correction methodAuto calibration with one key,auto detection.
Output methodOutput and print testing data conveniently with standard communication interface of RS-232C.
Standard accessoriesHost,tank,test board,tweezer,thermometer,weight,wind and dust cover,a set of measuring particle parts,a set of measuring floating body parts,power transformer
wind and dust coverAdopt the unicase dedicated wind and dust cover
Option accessoriesDE-40 printer
powerDefault as AC 100V – 240V(Europe standard),based on destination country which standards be took.
Main featuresSimple operation,digital display,accurate measuring,stable,durable.

 

Hot Products

Summary: This instrument adopts double U tube vibrate method principle to test the density of ...
Summary: This instrument adopts double U tube vibrate method principle to test the density of ...
Summary: This instrument adopts double U tube vibrate method principle to test the density of ...
Summary: This instrument is made and designed as per GB/T1884, ASTM D1298 standard. It adopts ...
Summary: This instrument is made and designed as per GB/T1884, ASTM D1298 standard. It adopts ...
Summary: This instrument is made and designed as per GB/T1884, ASTM D1298 standard. It adopts ...