Martindale Abrasion and Pilling Tester , Martindale Abrasion Tester / Testing Machine

Martindale Abrasion and Pilling Tester, Martindale Abrasion Tester / Testing Machine

Summary:

Martindale Abrasion & Pilling Test Machine. To determine the abrasion and pilling resistance of all kinds of textile structures. Samples are rubbed against known abradants at low pressures and in continuously changing directions and the amount of abrasion or pilling is compared against standard parameters.

Standards: GB/T21196-2007,GB/T4802.2-2008,GB/T13775,FZ/T20020,ASTM D4970,ISO12945-2ASTM D4966,ASTM D3886,ISO12947,JIS L1096,IWS,TM196,TM112,M&S.

Application: Used for testing the performance of the wearing resistance, abrasion, appearance change (pilling degree/class) of the textiles and membrane materials.

Technical characteristics:

1,Number of working position: 4,6 or 8
2,Counter range: 0~99999
3,Max stroke: horizontal: 60.5±0.5mm   vertical: 24±0.5mm
4,pressure weight:

a. specimen holder:200±1g          

b. load piece for apparel & household textiles:395±2g
c. load piece for workwear & upholster:594±2g    

d. stainless steel plate:260±1g
5,abrader diameter :
       type A 200g(1.96N) (9KPa),¢ 28.8 -0.084mm
       type B 155g(1.52N)(12KPa),¢ 90 -0.10mm
6,abrader speed:50-2r/min
7,pressing weight:2385±10g
8,instrument size:885×600×410mm
9,power supply:Ac220V 50Hz  500W

10,weight:150kg

Instrument configuration:

1. Power switch         2. Guide board         3. Drive mechanism

4. Holder for abrasive    5. Eccentric wheel      6. Steel ball

7. Hammer             8. Specimen holder part

9. Bracket for ball bearing   10. Control panel        11. Guide way

12. Level gauge