250LPH Customized Reverse Osmosis Water Purification System
Supplier
Reverse osmosis process uses semi permeable spiral wound membranes
to separate and remove dissolved solids, organic, pyrogens,
submicron colloidal matter and bacteria from water. Feed water is
delivered under a pressure of approximately 16 kg/cm2
throughreverse osmosis membranes. Water permeates the minute pores
of the membrane and is delivered as purified water. Impurities in
the water are concentrated in the reject stream and flushed to
drain. Reverse osmosis is capable of removing 90-99% of total
dissolved solids (TDS), 99% of organic, including pyrogens, and 99%
of all bacteria in the feed water.
Detailed parameters of RO system
RO systems-250LPH |
Control | Automatic | Voltage | AC 220V/380V |
RO membrane DN | 0.00001-0.0001um | Ion removal rate | ≥99% |
Endotoxin, bacterial removal rate | ≥ 99% | Effluent conductivity | ≤ 15us / cm (source water quality TDS <200ppm) |
Working pressure | 0.2-0.4 Mpa | Water temperature | 5-39℃ |
Raw Water Pump | CHL2-30 | High Press Pump | CDL2-9 |
Max Size(L*W*H) | 700*700*1550mm |
Features Of Ro System
- pressure is the main force in RO separation process, which does not
go through the phase transition of energy intensive exchange and
has low energy consumption;
- RO does not need a lot of precipitants and adsorbents, and its
operating cost is low;
- RO separation engineering is simple in design and operation and
short in construction period;
- RO purification efficiency is high and environmentally friendly.
Therefore, RO technology has been widely used in domestic and
industrial water treatment, such as desalination of seawater and
brackish water, production of medical and industrial water,
preparation of pure and ultra-pure water, industrial wastewater
treatment, food processing concentration, gas separation, etc.
Application Of RO System
- Electronic industry: Pre-filter for ultra pure water, chemical
products and pure water
- Food and beverage industry: filter for mineral water, wines and
fruit juice
- Medicine industry: filter for drug liquid, gases
- Chemical industry: filter for organic solvent
- Petroleum industry: filter for oil-field flooding
- Power system
- Metallurgical industry
- Medical and pharmaceutical industry
- Brackish water desalination etc