Building Composite Plasterboard production machine equipment
The gypsum board production line is the professional equipment for
producing the new paper-faced plaster board materials.
The principle work procedures includes:
1 Calcined gypsum powder, water and other additives enter into the
mixer by automatic metering and conveying system. Gypsum slurry,
generated from mixer after mixing, would be evenly scattered on the
surface of continuous moving bottom paper.
2 With continuous moving and vibrating, gypsum slurry will
gradually diffuse and evenly scattered on the surface of moving
bottom paper. Then it goes into the forming machine and compound
with top paper. By the process of extruding and forming, the slurry
would sealed by top paper and bottom paper and bottom paper. Thus,
pulpous plasterboard is formed.
3 While it conveyed by setting belt, wet gypsum board gradually
formed after board shaping, natural coagulation and automatic
casting. The wet boards, arranged by programmed control system,
quickly enter into the dryer, through rollers, belt conveyor and
board turnover.
4 Under strict controls in temperature zones of dryer, the wet
board dried by different temperature hot air blow. Modified starch
would stick with the paper. The dry gypsum boards would be
transported out of dryer.
5 Then the board would be turned over again and folded together (
face inside), cut into certain finished product size and edge
sealed.
6 Finally, it comes to automatic stacker for stacking. Then can be
transported to warehouse by forklift after stacking.
The running speed of forming system.
| Annual capacity ( Million /M2) | Linear Speed ( M/ Min ) |
| 2 | 4.0 |
| 3 | 6.0 |
| 5 | 10.0 |
| 8 | 16.0 |
| 10 | 20.0 |
| 20 | 40.0 |
| 30 | 60.0 |
| 50 | 100.0 |
| Raw Material Designation | Consumption
(Kg/m2) |
| Gypsum Powder | 5.7-6.1 |
| Faced paper(210g/m2) | 0.42 |
| Water | 4.3-4.9 |
| Modified starch | 0.25-0.30 |
| Foaming agency | 0.008-0.011 |
| Emulsion(White latex) | 0.006-0.007 |
| Electricity | 0.3-0.4kwh |
| Coal | 0.7-1.0Kg(6000 Kcal) |
Our Services
1 Our company has professional installation & commissioning
teams, we will install and debug
the production line at the customers' place until the equipment
produces qualified products.
2 We supply spare parts all the year round. The guarantee of
equipment is one year.
3 We are responsible for the technical consultation and service all
the year around and help
to solve all kinds of technical problems at any time.
4 We will help customers do the consignment and the relevant
procedure for import and
export.
5 Our company supply the information of the seller for all kinds of
raw materials and
relevant information for free.
