XRB-ZWA BEARING INDUSTRY CO., LIMITED |
|
Bearing specification | |
---|---|
Housing Number | P305D1 |
Insert Bearing number | UC305-100D1 |
Shaft Size: | 1 Inch |
Bolt Size | M14 1/2 in |
H | 1 49/64 inch |
L | 6 7/8 inch |
A | 1 25/32 inch |
J | 5 3/16 inch |
weight | 1.7kg |
Locking style | Set Screw Locking |
Grease Fitting | A-1/4-28UNF |
Bore 1 Inch Size NSK UCP305-100D1 Pillow Block Bearing Unit with
Precision balls and cage
High Quality NSK UCP305-100D1 Pillow Block Bearing Unit consist of Cast Iron Housing(Pillow type), ball, cage, wide
inner ring,Hexagon soket set scrow, outer ring with spherical
outside serface, Seal, Grease hole, slinger ect. you can see that
this bearing have a wide inner ring with set screws for attaching
to the shaft,housing is cast iron with a grease zerk for
re-lubrication the bearing.
The NSK UCP305-100D1 Pillow Block Bearing Unit with a cover
consists of a standard bearing unit and an outside covering for
extra protection against dust. Special consideration has been given
to its design with respect to dust-proofing. Sealing devices are
provided in both the bearing and the housing, so that units of this
type operate satisfactorily even in such adverse environments as
flour mills, steel mills, foundries, galvanizing plants and
chemical plants, where excessive dust is produced and/or liquids
are used. They are also eminently suitable for outdoor environments
where dust and rain are inevitable, and in heavy industrial
machinery such as construction and transportation equipment.
Bearing Number | UC305-100D1 Bearing Unit |
Shaft Size d | 1 in |
Weight | 3.7 lb |
Locking Style | Set Screw Locking |
Housing Construction | Two-Bolt Pillow Block |
Base to Center Height H | 45.00 mm |
Total Length L | 175.00 mm |
Housing Width A | 45.00 mm |
Bolt Hole Spacing J | 132.00 mm |
Bolt Hole Size N | 17.00 mm |
Bolt Hole Length N1 | 20.00 mm |
Foot Height H1 | 16.00 mm |
Total Height H2 | 85.00 mm |
Dimension L1 | 55.00 mm |
Inner Ring Width B | 38.00 mm |
Center of Bearing from End S | 15 mm |
NSK UCP305-100D1 Pillow Block Bearing Unit is a pillow block
unit with a rigid cast iron housing and two specially designed set
screws in the inner-ring spaced at 120 degrees for maximum holding
power and reliability for a wide variety of applications and
operating conditions.
Duty: Standard, Medium, Heavy
NAP is a pillow block unit with an eccentric locking collar insert
that provides a very secure grip to the shaft that becomes even
more secure during continued operation. It is specifically used for
singledirection/non-reversing rotation.
Duty: Standard, Heavy
NCP is a pillow block unit with a specially designed concentric
locking collar that provides 360 degrees of shaft contact. It
produces a more concentric lock on the shaft compared to other
locking styles and it functions very well for high speed
applications.
Duty: Standard
UKP is a pillow block unit with a tapered-bore bearing insert that
utilizes an adapter sleeve assembly to produce a highly concentric
and secure lock on the shaft to reduce slippage and fretting
corrosion even under adverse conditions.
Duty: Standard, Medium, Heavy
And also Explorer Bearing as China Bearing Manufacturer, it not
only supply Pillow block Bearing Units, but also many other kinds
of China Ball And Roller Bearing & sliding Bearing
-- Electrically Insulated bearing
-- Deep groove ball bearing
-- Cylindrical roller bearing
-- Spherical roller bearing
-- Pillow Block Bearing Unit
-- Plummer block Housing Unit
-- Angular contact ball bearing
More questions, please contact our sales team.
Skype:brandbearings
Whatsapp: 0086-13280450757
E-mail:sales@bearingexporter.net
Contact:Mr.Fred
www.bearingexporter.net