Active Member
|
[China]
Address: liaocheng development zone,liaocheng of Shandong
Contact name:Fred
XRB-ZWA BEARING INDUSTRY CO., LIMITED |
|
|
| Bearing specification | |
|---|---|
| Housing Number | P207D1 |
| Insert Bearing number | UC207-107D1 |
| Shaft Size: | 1 7/16 inch |
| Bolt Size | M14 1/2 in |
| H | 1 7/8 INCH |
| L | 6 9/16 inch |
| A | 1 7/8 inch |
| J | 5 inch |
| weight | 4.4 kg |
| Locking style | Set Screw Locking |
| Grease Fitting | A-1/4-28UNF |
High speed NSK Inch Pillow Block Bearing Unit
UCP207-107D1 used in Textile Machines
High Speed NSK Pillow Block Bearing unit UCP207-107D1 consist of Cast Iron Housing(Pillow type), ball, cage, wide inner
ring, Hexagon soket set scrow, outer ring with spherical outside
serface, Seal, Grease hole,slinger ect. you can see that this
bearing have a wide inner ring with set screws for attaching to the
shaft,housing is cast iron with a grease zerk for re-lubrication
the bearing.
Although its basic performance are similar with deep groove ball
bearings, However, most of these bearings are used in relatively
rough machines . Installation positioning is not precise enough,
Axial difference of centralization between shaft and housing hole,
And the accuracy of the bearing itself is not high enough, Some
structures are also rough, Therefore, the performance of the actual
performance of the same specifications of the deep groove ball
bearing have to make a considerable discount.
NSK UCP207-107D1 Pillow block bearing unit with Screw are used for
the through-shafts with large differences in stiffness and
deflection, This bearing has seals on both sides , Can prevent the
intrusion of dirt . Appropriate amount of lubricant was filled
before shipped from factory, No clean before installation, and also
no more lubrications, when the screw on the inner ring was fasten
on the shaft, The allowable axial load must be not exceed 20% of
the rated dynamic load.
| NSK Part No. | Bearing Application | Dimension |
| UCP203 | Pillow Block Unit - Standard Duty | 95 x 17 x 30.2 mm |
| UCP203-11 | Pillow Block Unit - Standard Duty | 95 x 11/16' x 30.2 mm |
| UCP204 | Pillow Block Unit - Standard Duty | 95 x 20 x 33.3 mm |
| UCP204-12 | Pillow Block Unit - Standard Duty | 95 x 3/4' x 33.3 mm |
| UCP205 | Pillow Block Unit - Standard Duty | 105 x 25 x 36.5 mm |
| UCP205-13 | Pillow Block Unit - Standard Duty | 105 x 13/16' x 36.5 mm |
| UCP205-14 | Pillow Block Unit - Standard Duty | 105 x 7/8' x 36.5 mm |
| UCP205-15 | Pillow Block Unit - Standard Duty | 105 x 15/16' x 36.5 mm |
| UCP205-16 | Pillow Block Unit - Standard Duty | 105 x 1' x 36.5 mm |
| UCP206 | Pillow Block Unit - Standard Duty | 121 x 30 x 42.9 mm |
| UCP206-17 | Pillow Block Unit - Standard Duty | 121 x 1.1/16' x 42.9 mm |
| UCP206-18 | Pillow Block Unit - Standard Duty | 121 x 1.1/8' x 42.9 mm |
| UCP206-19 | Pillow Block Unit - Standard Duty | 121 x 1.3/16' x 42.9 mm |
| UCP206-20 | Pillow Block Unit - Standard Duty | 121 x 1.1/14' x 42.9 mm |
| UCP207 | Pillow Block Unit - Standard Duty | 127 x 35 x 47.6 mm |
| UCP207-104D1/ UCP207-20 | Pillow Block Unit - Standard Duty | 127 x 1.1/4' x 47.6 mm |
| UCP207-21 | Pillow Block Unit - Standard Duty | 127 x 1.5/16' x 47.6 mm |
| UCP207-22/UCP207-106D1 Bearing Unit | Pillow Block Unit - Standard Duty | 127 x 1.3/8' x 47.6 mm |
| UCP207-23/UCP207-107D1 Bearig unit | Pillow Block Unit - Standard Duty | 127 x 1.7/16' x 47.6 mm |
| UCP208 | Pillow Block Unit - Standard Duty | 137 x 40 x 49.2 mm |
INTERCHANGE
AMI: UCP 207-20
Browning: VPS-220
Dodge: P2B-SC-104
Fafnir: RASC-1 1/4
Fafnir: YAS-1 1/4
Link-Belt: P3-U220N
Link-Belt: P3-Y220N
NSK: USP207-20S
NTN: UCP207-104T
Peer: FHSP207-20G
RHP: NP-1 1/4
Sealmaster: NP-20
Liaocheng Explore bearing is the China Bearing manufacturer & exporter & factory & supplier, Pillow Block Bearing
also name insert bearing with housing, it can supply NSK
UCP207-107D1 pillow block bearing unit and produce pillow
block bearing unit with cast iron housing, pressed steel housing,
stainless steel housing. and many kinds of Pillow Block Bearing
unit like UCP200 Series, UCPX00 Series, HCAK200 Series, UEP200 Series,
SBSP200 Series, SSUCP200 Series, SSUCP200-TP Series, TYPE-E Series,
M2000 Series, BLP200 Series, ALP200 Series, UCPH200 Series, UCPA200
Series. we are sure we can supply the good price, fast delivery and
perfect service for all of the bearing distributor and end user.
More questions,please contact our sales team.
Skype:brandbearings
E-mail:sales@bearingexporter.net
Contact:Mr.Fred
www.bearingexporter.net
