Active Member
|
[China]
Address: liaocheng development zone,liaocheng of Shandong
Contact name:Fred
XRB-ZWA BEARING INDUSTRY CO., LIMITED |
|
|
| Bearing specification | |
|---|---|
| Housing Number | P306D1 Pillow Block |
| Insert Bearing number | UC306D1 Bearing |
| Shaft Size: | 30mm |
| Bolt Size | M14 1/2 in |
| H | 50mm |
| L | 180mm |
| A | 50mm |
| J | 140mm |
| weight | 2.2 kg |
| Locking style | Set Screw Locking |
| Grease Fitting | A-1/4-28UNF |
Cast Iron/Ductile NSK UCP306D1 Pillow Block Bearing Unit 30mm Bore size used in Conveyor Systems
High Quality NSK UCP306 Pillow Block Bearing Unit consist of Cast Iron Housing (Pillow type), ball, cage, wide inner ring, Hexagon soket set scrow, outer ring with spherical outside serface, Seal, Grease hole, slinger ect. you can see that this bearing have a wide inner ring with set screws for attaching to the shaft,housing is cast iron with a grease zerk for re-lubrication the bearing.
The NSK UCP306 Pillow Block Bearing Unit set screws are placed at a 90-degree angle to optimize balance between holding power and inner ring distortion. The NSK UCP306 Pillow Block Bearing Unit are relubricatable and offer a full-width inner ring for added stability.
NSK UCP306 Pillow Block Bearing Unit interchange with many different models and can be bolted to machinery without any modification. The exact amount of clearance is allowed between the bore and the shaft to allow a perfect fit. Therefore, NSK Ball Bearing Units do not require any additional lubrication or seal installation. As a result, handling and downtime can be drastically reduced. Four different locking mechanisms are available:
(1) Set Screw
(2) Eccentric Locking Collar
(3) Tapered Adapter
(4) Concentric Collar Mounting the bearing to the shaft can be executed easily and securely by adopting any of these methods.
How to select the right pillow block for your application
1. Select the housing style that best suits your application
P - PILLOW BLOCK
PA - TAPPED-BASE
PH - HIGH-BASE
LP - LIGHT
IP - THICK
PP - STAMPED STEEL
Bearing Number | UC306D1 Bearing |
Shaft Size d | 30 mm |
Weight | 4.9 lb / 2.20 Kg |
Locking Style | Set Screw Locking |
Housing Construction | Two-Bolt Pillow Block |
Base to Center Height H | 50.00 mm 1.969 in |
Total Length L | 180.00 mm 7.087 in |
Housing Width A | 50.000 mm 1.969 in |
Bolt Hole Spacing J | 140.00 mm 5.512 in |
Bolt Hole Size N | 17.00 mm 0.669 in |
Bolt Hole Length N1 | 20.00 mm 0.787 in |
Foot Height H1 | 17.00 mm 0.669 in |
Total Height H2 | 95.00 mm 3.740 in |
Dimension L1 | 52.50 mm 2.0625 in |
Inner Ring Width B | 43.00 mm 1.693 in |
Center of Bearing from End S | 17 mm 0.669 in |
Static Load Rating | 3372 lbf15000 N |
Dynamic Load Rating | 6002 lbf26700 N |
XRB bearing is the China Bearing manufacturer & exporter & factory & supplier, Pillow Block Bearing also name insert bearing with housing, it can NSK UCP306D1 Pillow Block Bearing Units And produce pillow block bearing unit with cast iron housing, pressed steel housing, stainless steel housing. and many kinds of Pillow Block Bearing unit like UCP200 Series,UCPX00 Series, HCAK200 Series, UEP200 Series, SBSP200 Series, SSUCP200 Series, SSUCP200-TP Series,TYPE-E Series, M2000 Series, BLP200 Series, ALP200 Series, UCPH200 Series, UCPA200 Series. we are sure we can supply the good price, fast delivery and perfect service for all of the bearing distributor and end user.
More questions, please contact our sales team.
Skype:brandbearings
Whatsapp: 0086-13280450757
E-mail:sales@bearingexporter.net
Contact:Mr.Fred
www.bearingexporter.net
