Shanghai Zhoubo welding & cutting technology CO.,LTD. |
Verified Suppliers
|
|
Plasma Cutting Silver Electrode 220665, For HPR130XD / HPR130
Plasma Cutter Machine
Our company produces : electrode, nozzle, shield, swirl ring,
inner cap, retaining cap, water tube, torch body and so on.
1. HT4400, HT4001, HPR400XD, HPR260XD, HPR130XD, HPR260,
HPR130, HSD130, HD3070, HD4070, HT2000, MAX200, POWERMAX1650,
POWERMAX1250, POWERMAX65, POWERMAX85, POWERMAX45, POWERMAX30
2. Kjellberg consumables for HiFocus80i, HiFocus100i, HiFocus130i,
HiFocus160i, HiFocus280i, HiFocus360i, HiFocus440i and so on.
3. Esab consumables for PT-25, PT-36, PT-37, PT-600, PT-15XL,
PT-19XL, PT-31XL and so on.
4. Koike consumables for SUPER 400, SUPER 400 PLU.
5. Komatsu plasma consumables for 30KW, 60KW 3082, 3084, 3086,
6082, 6084.
Machine | HEC NO. | Ref NO. | Description |
| H03192 | 220192 | Electrode,30Amp |
H03552 | 220552 | Electrode,50Amp | |
H03187 | 220187 | Electrode,80Amp | |
H03181 | 220181 | Electrode,130Amp | |
H03352 | 220352 | Electrode,200Amp | |
H03435 | 220435 | Electrode,260Amp | |
H03649 | 220649 | Electrode,130Amp Bevel | |
H03541 | 220541 | Electrode,260Amp Bevel | |
H03665 | 220665 | Electrode,130Amp(silver Plus) | |
H03666 | 220666 | Electrode,200Amp(silver Plus) | |
H03668 | 220668 | Electrode,260Amp(silver Plus) | |
H03629 | 220629 | Electrode,400Amp | |
H73180 | 220180 | Swirl Ring,30Amp | |
H73553 | 220553 | Swirl Ring,50Amp | |
H73353 | 220353 | Swirl Ring,200Amp | |
H73179 | 220179 | Swirl Ring,80/130/260Amp(Bevel) | |
H73436 | 220436 | Swirl Ring,260/260Amp(Bevel) | |
H73631 | 220631 | Swirl Ring,400/400Amp(Bevel) | |
H13193 | 220193 | Nozzle,30Amp | |
H13554 | 220554 | Nozzle,50Amp | |
H13188 | 220188 | Nozzle,80Amp | |
H13182 | 220182 | Nozzle,130Amp | |
H13354 | 220354 | Nozzle,200Amp | |
H13439 | 220439 | Nozzle,260Amp | |
H13646 | 220646 | Nozzle,130Amp(Bevel) | |
H13542 | 220542 | Nozzle,260Amp(Bevel) | |
H13632 | 220632 | Nozzle,400/400Amp(Bevel) | |
H33754 | 220754 | Retaining Cap 30/50Amp | |
H33176 | 220176 | Retaining Cap 80/130Amp | |
H33355 | 220355 | Retaining Cap 200Amp | |
H33433 | 220433 | Retaining Cap 260Amp | |
H33603 | 220603 | Retaining Cap (Bevel) 130/260Amp | |
H33756 | 220756 | Retaining Cap 80/130Amp | |
H33757 | 220757 | Retaining Cap 200Amp | |
H33760 | 220760 | Retaining Cap 260Amp | |
H33635 | 220635 | Retaining Cap 400/400Amp(Bevel) | |
H33740 | 220740 | Retaining Cap (Bevel) 130/260Amp | |
H23194 | 220194 | Shield,30Amp | |
H23555 | 220555 | Shield,50Amp | |
H23189 | 220189 | Shield,80Amp | |
H23183 | 220183 | Shield,130Amp | |
H23356 | 220356 | Shield,200Amp | |
H23440 | 220440 | Shield,260Amp | |
H23645 | 220645 | Shield,130Amp(Bevel) | |
H23545 | 220545 | Shield,260Amp(Bevel) | |
H23761 | 220761 | Shield,200Amp | |
H23764 | 220764 | Shield,260Amp | |
H23636 | 220636 | Shield,400/400Amp(Bevel) | |
H23742 | 220742 | Shield,130Amp(Bevel) | |
H23741 | 220741 | Shield,260Amp(Bevel) | |
H43173 | 220173 | Retaining Cap 30/50/80/130Amp | |
H43398 | 220398 | Retaining Cap 200/260/(Bevel)130/260Amp | |
H43747 | 220747 | Retaining Cap 30/50/80/130Amp | |
H43637 | 220637 | Retaining Cap 200/260/400Amp(Bevel) | |
H83818 | 128818 | HPR torch assembly | |
H83162 | 220162 | Quick-disconnect torch | |
H83163 | 220163 | Quick-disconnect recepticle | |
H83706 | 220706 | Quick-disconnect torch | |
H83705 | 220705 | Quick-disconnect recepticle | |
H93571 | 220571 | Water Tube with O-Ring | |
H93340 | 220340 | Water Tube with O-Ring(30/50/80/130/200/260Amp) | |
H93700 | 220700 | Bevel water tube(mild steel-130A) |
Technical Support:
plasma cutting arc fault analysis
5. earth wire and workpiece contact
Grounding is an essential preparation before cutting. Without
special grounding tool, the workpiece surface with insulation and
long-term use of aging serious ground wire, etc., will make the
earth and the workpiece contact. Solution: use a special grounding
tool, and check whether the insulation effects of the ground and
the workpiece surface contact, avoid the use of aging grounding
wire.
6. spark generator can not automatically cut off
Plasma cutting machine work, first of all to ignite the plasma arc,
by the high frequency oscillator excited gas between the electrode
and the inner wall of the nozzle, resulting in high-frequency
discharge, the gas ionization and the formation of local small arc,
the small arc by compressed air, ejected from the nozzle to ignite
plasma arc. This is main task spark generator. Under normal
circumstances, the working time of the spark generator is only 0. 5
~ 1s, can not be automatically cut off the reasons for the general
control circuit board components, the discharge electrode gap
between the spark generator is not suitable. Solution: should
always check the spark generator discharge electrode, so that the
surface is smooth, timely adjustment of the discharge electrode gap
of the spark generator (0. 8 ~ 1. 2mm), if necessary, replace the
control panel.
7. other
In addition to the above reasons, the cutting speed is too slow,
cutting the verticality of the torch and workpiece, and the
operator of the plasma cutting machine familiarity, the operation
level and influence the stability of the plasma arc, the user
should notice in these aspects.