Shanghai Zhoubo welding & cutting technology CO.,LTD. |
Verified Suppliers
|
|
Kjellberg Plasma Cutter Nozzle Cap .11.848.401.1619 G3219 For
Kjellberg Consumables
Shanghai ZhouBo Welding & Cutting Technology company can offer you all plasma consumables for , Kjellberg, Esab, Koike,
Komatsu, Thermadyne, such as: electrode, nozzle, shield, swirl
ring, inner cap, retaining cap, water tube, torch body and so on.
Kjellberg machine :PA-S20W, PA-S25W, PA-S40W, PA-S45W, PA-S70W,
PA-S75, PB-S45W, PB-S47, PB-S75, PB-S76, PB-S77, PB-S80, Fine
Focus450, Fine Focus800, Fine Focus900 and so on
Electrode: M002, M012, M001, M011, S002Y, S012X, T012Y, S042, S052,
G002Y, G032Y, G092Y, G015Y, G071, G052, G042 and so on.
Machine | HEC NO. | Thum NO. | Ref NO. | Description |
| K94211 | G901Y | .11.848.201.142 | Cooling tube |
K94212 | G902Y | .11.852.201.142 | Cooling tube | |
K94241 | G931Y | .11.848.401.142 | Cooling tube | |
K0402 | G002Y | .11.848.221.300 | Cathode O2 | |
K0105 | G015Y | .11.848.231.350 | Cathode O2 | |
K0101 | G011Y | .11.848.231.320 | Cathode O2 | |
K0106 | G016Y | .11.848.231.360 | Cathode O2 | |
K0402 | G092Y | .11.848.401.310 | Cathode O2 | |
K7441 | G101 | .11.848.221.145 | Gas guide | |
K1466 | G2006 | .11.848.221.406 | Nozzle O2 25A | |
K1467 | G2007 | .11.848.221.407 | Nozzle O2 35A | |
K54124 | G3004 | .11.848.201.1604 | Nozzle cap | |
K641515 | G4015 | .11.848.201.1515 | Swirl gas cap | |
K641220 | G4020 | .11.848.201.1520 | Swirl gas cap | |
K44191 | G501 | .11.848.201.081 | Protective cap | |
K0403 | G003Y | .11.848.221.310 | Gathode -O2 | |
K7442 | G102 | .11.848.221.146 | Gas guide | |
K1468 | G2008 | .11.848.221.408 | Nozzle O2 50A | |
K14610 | G2010 | .11.848.221.410 | Nozzle O2 80A | |
K14612 | G2012 | .11.848.221.412 | Nozzle O2 120A | |
K14614 | G2014 | .11.848.221.414 | Nozzle O2 160A | |
K14616 | G2016Y | .11.848.221.416 | Nozzle O2 200A | |
K541228 | G3028 | .11.848.201.1628 | Nozzle cap | |
K641522 | G4022 | .11.848.201.1522 | Swirl gas cap | |
K641525 | G4025 | .11.848.201.1525 | Swirl gas cap | |
K641530 | G4030 | .11.848.201.1530 | Swirl gas cap | |
K04242 | G032Y | .11.848.421.310 | Cathode O2 | |
K04244 | G034Y | .11.848.421.330 | Cathode O2 | |
K74251 | G121 | .11.848.421.145 | Gas guide | |
K14826 | G2326Y | .11.848.421.426 | Nozzle O2 280A | |
K14830 | G2330Y | .11.848.421.430 | Nozzle O2 360A | |
K14831 | G2331Y | .11.848.421.431 | Nozzle -O2-400A | |
K541409 | G3209 | .11.848.401.1609 | Nozzle cap | |
K541419 | G3219 | .11.848.401.1619 | Nozzle cap | |
K541429 | G3229 | .11.848.401.1629 | Nozzle cap | |
K641745 | G4345 | .11.848.401.1545 | Swirl gas cap | |
K641750 | G4350 | .11.848.401.1550 | Swirl gas cap | |
K641755 | G4355 | .11.848.401.1555 | Swirl gas cap |
Technical Support:
The problem of plasma cutting
1, spark generator can't be broken arc
Plasma cutting machine work, first of all to ignite the plasma arc,
by the high frequency oscillator excited gas between the electrode
and the inner wall of the nozzle, resulting in high-frequency
discharge, the gas ionization and the formation of local small arc,
the small arc by compressed air and ejected from the nozzle to
ignite the plasma arc, which is main task spark generator. Under
normal circumstances, the spark generator working time is only 0. 5
~ 1s, the reason does not automatically break arc is generally
offset control circuit board components, discharge electrode gap of
the spark generator is not right. Should always check the spark
generator discharge electrode, make the surface smooth, timely
adjustment of the discharge electrode gap spark generator (0. From
8 to 1. 2mm), it is necessary to change control board.
2, poor contact with the ground
The ground is the essential preparation before cutting work a.
Without the use of special grounding tool, workpiece surface
insulation and long-term aging serious ground, will cause poor
contact with the ground. Should use special grounding tool, and
check whether the insulation effect of the ground contact with the
workpiece surface, avoid the aging ground