Ellawig companys |
Verified Suppliers
|
|
Environmentally Friendly Soundproof Cotton High Temperature Resistant
Description
(Rich Milk Powder) Spray Dryer is the most widely used process in liquid shaping technology. It is suitable for producing powder and granules solid products from solution, emulsion, soliquoid, and pumpable paste materials. Therefore, when the particle size, final moisture, bulk density and granules shape meet the accurate standard, centrifugal spray drying is a ideal drying process.
Specification
Type | Spray Dryer | |||||||
5 | 25 | 50 | 100 | 150 | 200-3000 | |||
Inlet Temperature | ≤ 350°C | |||||||
Outlet Temperature | 80-90°C | |||||||
Evaporate Capacity (kg/h) | 5 | 25 | 50 | 100 | 150 | 200-3000 | ||
Driving Force | compressed air drive | mechanical drive | ||||||
Rotate Speed | 25000 | 22000 | 21500 | 18000 | 18000 | 15000 | ||
Diameter of Atomizer (mm) | 50 | 120 | 120 | 120 | 150 | 180-340 | ||
Heating Source | Electricity | Electricity | electricity +steam+fuel oil+coal gas | electricity +steam | electricity +steam+fuel oil+coal gas | To be solved by users | ||
Electric-heating Power (kW) | 9 | 45 | 60 | 81 | 99 | |||
Recovery Rate (%) | ≥ 95 | ≥ 95 | ≥ 95 | ≥ 95 | ≥ 95 | ≥ 95 | ||
Installation Size | A(mm) | 1000 | 1290 | 1730 | 2500 | 2800 | ||
B(mm) | 2100 | 3410 | 4245 | 5300 | 6000 | |||
C(mm) | 2300 | 4260 | 4645 | 6000 | 6700 | |||
φ D(mm) | 1060 | 1800 | 2133 | 2560 | 2860 | |||
E1(mm) | 1050 | 1200 | 1640 | 2100 | 2180 | |||
E2(mm) | 1050 | 1200 | 1640 | 2100 | 2180 | |||
F(mm) | 750 | 1000 | 1250 | 1750 | 1970 | |||
G(mm) | 530 | 1700 | 1750 | 1930 | 2080 | |||
H(mm) | 530 | 1300 | 1800 | 2600 | 3050 | |||
I(mm) | 530 | 1550 | 1600 | 1780 | 1960 |
The following matters need to be paid attention to in daily operation of centrifugal spray dryer:
1. First turn on the centrifugal fan, then turn on the electric heating, and check if there is any air leakage.
2. During preheating, the valve at the bottom of the drying chamber and the discharge port of the cyclone must be closed to prevent cold air from entering the drying chamber and reducing the preheating efficiency.
3. When the inlet temperature of the drying chamber reaches 180℃~220℃, turn on the centrifugal nozzle. When the nozzle reaches a high speed, turn on the feed pump and add the material liquid.
4. The temperature and humidity of the dried product depend on the exhaust air temperature. During operation, it is extremely important to ensure that the exhaust air temperature is a constant.
5å
Advantege:
We can offer you Cosmetic Squeeze Tube samples and can make samples according to your logo. we can do ODM products. In our factory, we have Specialized quality inspection personnel, they will check the products quality in each process.We have Professional team, Strictly quality control during produce process, We offer factory price with one-stop service: Design,Development,Producing,Assembling,Packing and Shipping.