These fifittings are for use in pressure piping and in pressure
vessel fabrication for service at moderate and elevated
temperatures.
The starting material for fifittings shall be fully killed steel,
consisting of forgings, bars, plates, sheet, and seamless or
fusion-welded tubular products with fifiller metal added and shall
conform to the chemical requirements Carbon steel elbow is a metal
pipe fitting that changes the direction of the carbon steel
pipe.Connection mode: wire buckle and welding.According to the
Angle points, there are 45° and 90°180° three more commonly used,
in addition, according to the needs of the project also includes
60° and other abnormal Angle elbow.Elbow materials are cast iron,
stainless steel, alloy steel, malleable cast iron, carbon steel,
non-ferrous metal and plastic, etc.The ways of connecting with the
pipe are: direct welding (the more common way) flange connection,
hot melt connection, electric melt connection, thread connection
and socket connection, etc.According to the production process can
be divided into: welding elbow, stamping elbow, push elbow, casting
elbow and so on.Other names: 90 degree bend, right Angle bend,
etcCarbon steel elbow can be divided into long radius elbow and
short radius elbow according to its radius of curvature.Long radius
elbow refers to the outer diameter of the pipe whose radius of
curvature is equal to 1.5 times, i.e., R= 1.5d.A short radius elbow
means that its radius of curvature is equal to the outside diameter
of the pipe, i.e. R= 1.0d.(D is elbow diameter, R is radius of
curvature.D can also be expressed in multiples.)According to the
pressure grade, there are about 17 kinds of pipes, which are the
same as the American standard. They are Sch5s, Sch10s, Sch10,
Sch20, Sch30, Sch40s, STD, Sch40, Sch60, Sch80s, XS.Sch80, Sch100,
Sch120, Sch140, Sch160 and XXS, among which STD and XS are the two
most commonly used ones.According to the Angle of the elbow, there
are 45° elbows, 90° elbows and 180° elbows.