Active Member
|
[China]
Address: 4F, Block A, Building 7, International Corporate Center, No. 188, Middle Huanbao Road
Contact name:William
Changsha Taihe Electronic Equipment Co. |
|
|
0~60Mpa PPM-S322A Forklift Weighing Scales Pressure Sensor
Description
The model PPM-S322 pressure transducer adopts thin-film sputtering
technology. Each sensor was strictly temperature compensated for
both zero and span. The PPM-S322 pressure transducer has been
developed for loader weighing system and it can measure pressure
and temperature signals simultaneously. This pressure transducer
offers extremely high accuracy up to 0.1%FS. Different electrical
connections are available, and it is convenient to install and
configure.
Features
1. Shock and vibration resistance, resistance to pressure spikes
2. Resistance to high and low temperature
3. High long-term stability
4. High accuracy up to 0.1%FS
5. Customized services are available
Applications
1. Loader weighing system
2. Forklift weighing scales
3. Truck crane
4. Other construction machinate
Specification:
Measuring medium | Gas, liquid, steam |
| Pressure type | Gauge pressure(G), Sealed pressure(S), Absolute pressure(A) |
| Pressure range | 0~16Mpa…25Mpa…35Mpa…40MPa …60Mpa |
| Power supply | 5VDC(3-12VDC) |
| Output signal of pressure | 0-10mV, (0-20mV at 10VDC) |
| Output signal of temperature | 18B20 |
| Non linearity | ≤0.04% FS |
| Non-repeatability | ≤0.02% FS |
| Accuracy | 0.1%FS, 0.2%FS |
| Long-term stability | 0.1%FS/year |
| Medium temperature | -40~125ºC |
| Operation temp | -40~+125ºC |
| Zero temp. drift | ≤0.005%FS/ºC, ≤0.01%FS/ºC |
| FS temp. drift | ≤0.008%FS/ºC, ≤0.015%FS/ºC |
| Response time | ≤0.8ms(10%~90%) |
| output impedance | 1500±50Ω,3300±50Ω,5500±1500Ω |
| Insulation resistance | ≥500 MΩ/100V |
| Over pressure | 200%FS (2 times FS) |
| Damage pressure | 500%FS (5 times FS) |
| Vibration resistance | 5~1000Hz |
| Shock resistance | 50g, 20ms |
| Process connections | M20×1.5,M16×1.5,M14×1.5,M10×1,G1/4, |
| Materials | Wetted parts: 17-4PH, 15-5PH Non-wetted parts: stainless steel 316, 1Cr18Ni9Ti |
| Ingress protection | IP65 |
| Electrical connections | Circular connector M12 x 1, cable outlet |
Dimensions in mm
Wiring Diagram
