Home Companies Shenzhen Chuangshuoda Electronic Co., Ltd

Box type metallizedPolypropylene film Interference Capacitor

Shenzhen Chuangshuoda Electronic Co., Ltd

Box type metallizedPolypropylene film Interference Capacitor

Country/Region China
City & Province Shenzhen Guangdong
Categories Capacitors

Product Details

METALLIZED POLYPROPYLENE FILM CAPCITOR
for interference Suppression and Across-The-Line, ClassX2


SELF-HEALING PROPERTIES
Typical applications:
interference suppression and ( across the line )
Appilcations.Suitable for use in situations where failureof the capacitor
Would not lead to danger of electric shock.
GENERAL TECHNICAL DATA
Dielectric:Polypropylenefilm.
Plates:Meal mylar depositedby evaporation under vacuum,
Winding:Non-inductive type.
Leads:Tinned wire.
Protection:
Plastic case,epoxy resin filled.
Box material is solvent resistant and flame retardantaccording to UL 94V-0
Marking:
Manufacturer's logo,series,capacitance,tolerance, Relateddocuments:lEC384-14 2nd Edition 1993
Operating temperature range:-40to +100oC

ELECTRICAL CHARACTERISTICS

Rated voltage(Vr):275Vac;50/60Hz
Capacitance range:4700pFto1.0 p f
Capacitance values:E12series(IEC63 Norm).
Capacitance tolerances(measuredat 1 kHz)
5%(J); ±10%(K); ±20% (M).
Dissipation factor(DF):≤0.3%at 10KHZ/20oC
Withstand voltage:
Applied 1,200 Vac for 60 sec or 2,100 Vdc for 1 sec
Approvals:CQC/UL/VDE/CSA/D/N/S/F/
Insulation resistance:>=15000m;C<=0.33F>=5000m;C>0.3F;20oC,100v 1min
Test conditions
Temperature:20±5oC
Voltage charge time:l min
Voltage charge: 100Vdc
Performance

3 x 104m for C≤0.33F
1×104mfor C≤0.33 F

TEST METHOD AND PERFORMANCE

Test conditions
Temperature:40±2oC
Relative humidity(RH):90-95%
Test duration: 500 hours
performance
0.66 x rated withstand voltage 60 sec.
Capacitance change(C/C):5%
Dissipation Factor(DF):200% of initial specified value.
Insulation resistance: ≥50%of initial limit
Endurance:
Test conditions
temperature:
100 ±3oC
Test duration: 1008h
Voltage applied:440Vac
Capacitance change(C/C): ≤3%
Dissipation Factor(A DF): ≤0.06%of increased value.
Insulation resistance: ≥50%of initial limit
Soldering heat resistance:
Test conditions
Solder bath temperature:
260±5oC
Solder time: 5±1 sec

Performance
Capacitance change(C/C):
≤3%

Hot Products

METALLIZED POLYPROPYLENE FILM CAPCITOR for interference Suppression and Across-The-Line, ClassX2 ...
PPN are constructed with polypropylene film dielectric.aluminum foil electrode,copper lead and epoxy ...
PPS are non-inductivewound with polypropylene Dielectric.in series with aluminumfor electrode using ...
1. High impedance,non inductance structure, winding metalized polyester film. 2. Highreliability and ...
1.Withstand high excess voltage shocks 2.Excellent flame retardant 3.Excellent moisture proof ...
1.Withstand high excess voltage shocks 2.Excellent flame retardant 3.Excellent moisture proof ...