Home Companies ANHUI CRYSTRO CRYSTAL MATERIALS Co., Ltd.

1440nm Laser Polished Co2+ MgAl2O4 Single Crystal Substrates

ANHUI CRYSTRO CRYSTAL MATERIALS Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: NO.10, HEZHANG ROAD

Contact name:Wu

Inquir Now

ANHUI CRYSTRO CRYSTAL MATERIALS Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

1440nm Laser Polished Co2+ MgAl2O4 Single Crystal Substrates

Country/Region china
Categories Other Non-Metallic Minerals & Products
InquireNow

Product Details

Double Side Polished Co2+:MgAl2O4 Single Crystal Substrate

 

Co2+:MgAl2O4 is a relatively new material for passive Q-switching in lasers emitting from 1.2 to 1.6 μm, in particular, for eye-safe 1.54 μm Er:glass laser, but also works at 1.44 μm and 1.34 μm wavelengths.

 
High absorption cross section (3.5×10-19 cm2) permits Q-switching of Er:glass laser without intracavity focusing both with flash-lamp and diode-laser pumping. Negligible excited-state absorption results in high contrast of Q-switch, i.e. the ratio of initial (small signal) to saturated absorption is higher than 10.

 

● Suitable for 1.54μm eye-safe lasers
● High absorption section and no excited state absorption

 

Co2+:MgAl2O4 Single Crystal Substrate  Main Properties:

 

Specifications
MaterialCo2+:MgAl2O4
Orentation<111>+/-0.5°
Doping rate of Co2+0.05-0.3 atm%
Optical density0.1-0.9
Absorption coefficient1.0cm-1-7cm-1
Transmittance30%-99%
Absorption section3.5 x 10-19cm2
Thickness/Diameter tolerance+/-0.1mm
Parallelism10″
Perpendicular5′
Surface quality10/5
Wavefront distortionLambda/8 @ 632nm
FlatnessLambda/8 @ 632nm
Aperture>90%
Chamfer0.1 x 45°
HR Coating<=0.2%(@ 1533nm)
Damage threshold>500MW/cm2

 

 

Co2+:MgAl2O4 Single Crystal Substrate Applications
  • Eye-safe 1540 nm Er:glass laser
  • 1440 nm laser
  • 1340 nm laser
  • Eye-safe laser range finder

Co2+:MgAl2O4 Single Crystal Substrate Brief Introduction:

  • Co2+:MgAl2O4 (Co2+:Spinel or Co:MALO) crystals is a new material for passive Q-switching in lasers emitting from 1.2 to 1.6 µm, in particular, for eye-safe 1.54 µm Er:glass laser, but also works at 1.44 µm and 1.34 µm wavelengths.
  • High absorption cross section (3.5 × 10-19cm2) permits Q-switching of Er:glass laser without intracavity focusing both with flash-lamp and diode-laser pumping.
  • Negligible excited-state absorption results in high contrast of Q-switch, i.e. the ratio of initial (small signal) to saturated absorption is higher than 10.
  • We offer the high quality Co:Spinel crystals materials with high optical quality and uniform distribution of Co2+ in laser grade polishing and coatings.
 
Co2+:MgAl2O4 Feature:
  • Suitable for 1540 nm eye-safe lasers
  • High absorption section
  • Negligible excited state absorptio
  • High optical quality
  • Uniformly distributed Co

About US

Crystro has perfect automatic production equipment, the current products are mainly concentrated in the YAG, TGG, TSAG,GGG, LGS, Ce:GAGG , Ce:YAG andCe: LuYAG production. the application of advanced process technology of manufacturing, reducing energy consumption to ensure sustainable development field of research and development.

 

Hot Products

Dia 5mm Big Size TGG Faraday Crystal Rods Terbium Gallium Garnet (TGG) Crystal Used for Faraday ...
Dia 10*15 Mm BiG Size TGG Single Crystal Low Absorption Description: Crystro Supply TGG Crystal ...
Square 28*28*6 TGG Crystal Blocks With High Extinction Ratio Description: The magneto-optical ...
Small Size 3x3.5x5mm TGG Magneto Optical Crystals For Fiber Isolator Terbium Gallium Garnet (TGG) ...
Fiber Isolator Used Magneto Optical Materials Square TGG Single Crystal Description: The magneto...
Size 10x10x5mm TB3Ga5O12 TGG heFaraday Optical Crystal Applications: Faraday Rotator Faraday ...