Beijing Nubway S & T Development Co, Ltd |
|
Germany laser bars 808nm diode laser hair removal machine with high power laser handpiece
Principle
808nm diode laser effectively penetrates deeply into dermis and is absorbed by the melanin
in the hair follicles. The laser energy transforms to thermal energy, which damages the hair
follicle without damaging the surrounding tissue to achieve effective hair removal.
Specification
Laser type | Semiconductor laser |
wavelength | 808 nm |
Output Mode | pulse output |
Control Method | Touch control |
Screen Size | 10.4 Inch |
Energy density | total 24~168J , average 10~70J/cm2 |
Pulse width range | 1-400ms |
Spot size | 12*20mm |
Frequency | 1-10HZ |
Light spot surface temperature | 0-30°C |
Cooling System | Semiconductor+built-in water+Air Cooling triple cooling systems |
Dimension | 500×425×1120mm |
Net weight | 60kg |
Fuse specification | Ø5×2510A |
Input Power | 1800W |
Power | AC220V±10% 10A 50HZ , 110v±10% 10A 60HZ |
Advantages
1. 10.4 inch touch screen with humanized and intellectualized control system, easy
to learn and operate. We differentiate man from woman, different parts of body
are separated, and the treatment protocols are offered in advance, which ensure
an accurate parameter settings and best effect.
2. Germany imported medically specialized pipe, long enough and strong tensile
strength, not easy to break down and environment friendly.
3. Big spot 12*20mm sapphire crystals and 100% German laser bar 600W totally output, save the treatment time and increase the high and even energy output.
4. Strong cooling system: Water + Wind + Semiconductor, to ensure 12 hours continuous working.
5. Better connector:Gilded copper-beryllium alloy electrode, more consolidated
to prevent unexpected damages.
6. The inner structure is fixed on customized metal sheet, stable shock-resistant
during shipping. If there is something wrong, easy to disassemble and repair.
Real Pictures
Frequent Ask Questions
How does laser hair removal work?
Our laser hair removal system uses a combination of energy and heat
to destroy follicles without harming the skin around them. After a
series of sessions, you’ll experience permanent hair reduction.
Depending which area(s) you decide to treat, you’ll always be ready
to slip into a swimsuit, won’t have to think about razor burn or
irritation, and will stop worrying about unsightly ingrown hairs.
How long does laser hair removal take?
You have millions of hair follicles in your body, all of which
cycle through different phases. Laser hair removal can only treat a
certain percentage of those follicles at a time (those that are in
the active phase), so it must be done at varied intervals. Because
no two bodies are the same, your treatment plan will be tailored
specifically to you, but we typically recommend at least six laser
hair removal sessions that take place four to ten weeks apart.
How should I prepare for laser hair removal?
With laser hair removal, nobody will know you’re undergoing
treatment (unless, of course, you want them to). Laser hair removal
sessions can be as short as fifteen minutes, and we just ask that
you stay out of the sun, shave the area to be treated; and avoid
using lotions, creams or products, for optimum results.
What does laser hair removal feel like?
Most clients describe the sensation as a mild “hot pinch,” similar
to the feeling of being snapped with a rubber band. In most cases,
the sensation goes away almost immediately.
Who qualifies for laser hair removal?
We customize your laser hair removal treatment to match your hair
color, skin color and type. As long as there is some color in your
hair (in most cases, even blond hair has enough color), then our
laser hair removal system will be effective.