Active Member
|
[China]
Address: West zone 3rd fl.Building No.5 Mauhwa Industry Park,No.1 Caida rd Street Shunyi District Beijing
Contact name:Candy Wang
Beijing Nubway S & T Development Co, Ltd |
|
| Laser type | Semiconductor laser(diode laser) |
| wavelength | 808 nm |
| Output Mode | pulse output |
| Control Method | Touch control |
| Screen Size | 10.4 Inch |
| Energy density | 20~70J/cm2 (Deviation≤±2%) |
| Pulse width range | 1-400ms |
| Spot size | 12*20mm |
| Frequency | 1-10HZ |
| Light spot surface temperature | 0-30°C |
| Cooling System | Semiconductor+built-in water+Air Cooling triple cooling systems |
| Dimension | 600*360*300mm |
| Net weight | 60kg |
| Fuse specification | Ø5×2510A |
| Input Power | 1800W |
| Input Voltage | AC220V±10% 10A 50HZ , 110v±10% 10A 60HZ |
The basic principle of semiconductor laser hair removal treatment basics that the biological effects , the machine issued 808nm laser , 808nm laser is easily absorbed without damaging the epidermis colored hair follicle , the energy of light emitted can be absorbed by the hairfollicle pigmentation after conversion into heat , thus increasing temperature in the hair follicle , when the temperature rised to a certain extent , the hair follicles will suffer irresversible damage , after a period of time , the damaged follicles are excreted with the body's metabolism , so as to achieve permanent hair removal .
1. Germany DILAS semiconductor laser bar the output power can reach to 1800W.
2.12*20mm big spot hair removal crystals, it can save the treatment time, increase the energy output and reduce the treatment cost
3. Super strong cooling circulatory system (water, wind and Semi-conductor)
4. 50J output power and 400ms pulse width, which can make sure the best result of permanent hair removal and reduce the pain to the least.
5.The head can keep working for 30 million flashes, which prove that the high cost efficiency of our machine.
6. A full range of self-test system, predict and detect possible failures and accidents occur
Hair removal process?
1. Cut or shave hair to 1-2mm or ask patients to shave at home 2-3 days before treatment.
2. Clear treatment area.
3. Turn on machine, adjust the parameter, set it to ‘standby’ .
4. Put cooling gel on treatment area about 2mm.
5. Wear protect goggles for patient and operator.
6. Shot the treatment area, let the crystal tip to touch cooling gel, You are permitted to have 1/3 overlapping on treatment area.
Post-treatment care:
1. No exposure to sunlight. Diode Laser Hair Removal Machine
Clients should protect the treated area from exposure to sunlight, sunbed or other
artificial tanning for one month after treatment. Tanning after treatment sessions
may enhance melanin regeneration, which may result in hyper-pigmentation
2. Free from always touching and pressing. Diode Laser Hair Removal Machine
Clients must do not press and scratch the treated area against infection.
3. Makeup. Diode Laser Hair Removal Machine
Makeup immediately after the treatment is not allowed for better curative-effect,
advising no makeup for four to five days after treatment. The skin is sensitive during
this period. Remove the makeup when swelling and reddening appearing at the treated
site against infection and pigmentation. Meanwhile, it is suggested to take some
medicine such as VitC, VitE. Diode Laser Hair Removal Machine
4. Food. Diode Laser Hair Removal Machine
Advising not eat the hot and spicy food.
During the initial stages, you will feel a light stinging sensation, which indicates that the
laser has been activated. Then a series of impulses are produced and may cause a slight
burning sensation and some prickling. Your technician may apply a topical anaesthetic
to the body area under treatment, in order to minimize the discomfort. But most people
do not need the anaesthetic. Some people have said that the feeling is like that of a
rubber band snapping against the skin.
About NUBWAY Group:
Beijing Nubway Development Co., Ltd. is established in 2003, engaged in R&D, sales and after-sales services of aesthetic devices & medical laser equipments, even part of IT area and Real estate sector. We have a professional team integrating with optics, machinery, electricity and medicine, to keep us ahead on in this field. NUBWAY factory covers 2500M2 and has more than 100 employees. All show NUBWAY is a reliable manufacturer and supplier.
Exhibition All Over The World:
Customers' visit:
