Belt Conveyor
Product Introduction
The belt conveyor is a high-performance belt conveyor researched
and developed by the company in accordance with the actual
situation of the production lines in such industries as diggings,
coal mining and metallurgy, etc.The belt conveyor adopts modular
part design, which can greatly simplify the production process,
reduce the difficulty in installation and removal, save the
logistic cost, shorten the stock cycle, improve the product quality
and facilitate later maintenance.
Features
Product advantages:
1. It is one of the cheapest ways to move material long distances.
2. There is virtually no degradation of your product caused by
conveying.
3. The conveyor can have changes in elevation.
4. The material can be visible on the belt while being conveyed.
5. Belts can be loaded virtually any place along the belt.
6. The belt can have "trippers" to unload the belt almost any
place.Product Description
Belt Conveyors are the most used for the transport of bulk materials and solid
objects at great speed,covering great distances up to 30000meters.Open troughed belt conveyors are used in a number of industries to transport bulk materials
quickly across large distances and rough terrain and suitable for conveying any type of material that must be
transported quickly across vast distances through rough terrain.
With extremely tight curve radii and large centre distances, these
systems enable very high throughput and high mass flows of robust
and heavy materials.| Belt Conveyor Technical Specifications |
|
| Belt width(mm) | Belt speed (m/s) |
| 0.8 | 1.0 | 1.3 | 1.6 | 2.0 | 2.5 | 3.2 | 4.0 | 5.0 | 6.5 |
| Capacity (m³/h) |
| 500 | 69 | 87 | 108 | 139 | 174 | 217 | | | | |
| 650 | 127 | 159 | 198 | 254 | 318 | 397 | | | | |
| 800 | 198 | 248 | 310 | 397 | 496 | 620 | 781 | | | |
| 1000 | 324 | 405 | 507 | 649 | 811 | 1014 | 1278 | 1622 | | |
| 1200 | | 593 | 742 | 951 | 1188 | 1486 | 1872 | 2377 | 2971 | |
| 1400 | | 825 | 1032 | 1321 | 1652 | 2065 | 2602 | 3304 | 4130 | |
| 1600 | | | | | 2186 | 2733 | 3444 | 4373 | 5466 | |
| 1800 | | | | | 2795 | 3494 | 4403 | 5591 | 6989 | 9083 |
| 2000 | | | | | 3470 | 4338 | 5466 | 6941 | 8676 | 11277 |
| 2200 | | | | | | | 6843 | 8690 | 10863 | 14120 |
| 2400 | | | | | | | 8289 | 10526 | 13158 | 17104 |
| Remark: Capacity is calculated by material horizontal conveyoring
,20°Operating stacking Angle,35°roller groove Angle . |
| Centre Distance: | Depending on the topographical conditions,conveyors of up to 30 km
are possible |
| Curve Radius - Standard values: | 400 m for horizontal curves, vertical curves depending on the
application |
| Conveying Capacity: | Up to 10,000 t/h, e.g. iron ore |
| Conveying Speed: | Up to 6.5 m/s |
| Angles of Inclination: | Up to 20° depending on the material to be conveyed |
Features:
1. Reliable and efficient - designed for decades.
2. Curved single-flight conveying systems of 20 km and longer.
3. Conveying capacity up to 10,000 t/h.4. Conveying speeds up to 6.5 m/s.
5. High-temperature bulk goods can be transported.
6. Highly economical with low investment costs.
7. Low-wear construction with a lengthy service life even with
highly abrasive materials.
8. Angle of inclination up to 30°.
RUNWELL Belt Conveyors for Transporting of Bulk Matierial Over Long
Distances:
Open troughed belt conveyors are suitable for conveying any type of
material that must be transported quickly across vast distances
through rough terrain. With extremely tight curve radii and large
centre distances, these systems enable very high throughput and
high mass flows of robust and heavy materials.Different materials can be conveyed in the upper and lower strands
at the same time. This makes troughed belt conveyors particularly
flexible and efficient. In addition, low investment costs and the
short amortisation time ensure high cost-effectiveness.Rough,
mountainous and fragmented terrain with extreme differences in
height is nothing our belt conveyors can't handle. The routing of
the XinRiSheng belt conveyors is adapted to the geographic and
topographic conditions by combining horizontal and vertical curves.
1.Reception chute 2.Support Leg 3.Tail Frame Assembly (including
turnabout Pulley, Tension Equipment etc.)
4.Ladder 5.Middle Frame Assembly 6.Walk way, handrail 7.Supporting
leg 8.Middle Frame Assemble 9.Upper Pin
10.Lower Pin 11.Base 12. Head Frame Assemble 13.Supporting Leg
14.Slider 15.Driven assembly 16.Head chute
Site Photo
Company ProfileShanghai RUNWELL Machinery Co.,Ltd (MR) is a professional
manufacturer of crushing and grinding equipment to process the
stones from mountain, river, and mines. In the past few decades, we
have been focused on the design, research&development,
manufacturing, sales, installation, and maintenance of the crushing
equipment, grinding equipment, other auxiliary equipment and all
their spare parts. Our main products are: Jaw Crusher, Cone
Crusher, Impact Crusher, Vertical Impact Crusher, Hammer Crusher,
Vibrating Feeder, Vibrating Screen, Sand Washer, Belt Conveyor,
Raymond Mill, High Pressure Mill, High Efficiency Mill, Ultrafine
Mill, Ball mill and so on. These equipments are widely used in the
industry of mining, construction materials, chemicals,
metallurgies, transportation, hydraulic engineering and so on. Our
business philosophy is: to have the most efficient communication
with customers, to choose the most suitable equipment for
customers, to produce the best quality equipment for customers, to
provide the fastest after-sales service for customers. We have our
own production base, with complete modern metal cutting equipment.
We are equipped with advanced mechanical design, simulation test
system and international first-class production lines and modern
test bases. We have our own quality control system and we strictly
follow the ISO9001:2008 standard on process of design, production,
assembly and inspection.
Packaging and Shipping
Questions & Answers
1. How long is the delivery time of your product?
The delivery time is within 20 working days.
2. What is the payment term?
The payment term is T/T.
3.How long is the product warranty period?
Our warranty period is 1 year, excluding wearing parts.
4.What's the after sale service of your company?
We will provide foundation drawing to the clients for installation.
Besides, we can provide guidance service for installation and
operation of workers, etc.
5. Can your company provide wearing parts?
We can deliver you the spare parts within 10 working days after
your order. If your equipment are not manufactured by our company,
please provide us the wearing parts drawing or number. 
