Shaoxing Nante Lifting Eqiupment Co.,Ltd. |
|
Nante Mobile Electrification System Busway -Transfer Guides, NANTE
JDC-H series is similar with VAHLE, Insulated Conductor
System,Single Pole Insulated Conductors Rails Jdc-H .
Single pole conductor rail systems are a safe source of power for
current capacities up to 3000 A(copper conductor up to 5000A) for
many power loads that are predominantly subjected to rough
operation, e.g., traveling cranes, loading bridges, container
handling equipment, monorail systems, coking machinery, electric
hoists, etc.
Detailed Product Description
The JDC-H conductor rail system is a modern power supply system
using single pole insulated conductor rails. It complies with the
latest regulations and provides the electric energy for material
handling equipments such as overhead cranes.
The aluminum conductor rail is provided with a proven and patented
stainless steel contact surface. Any numbers of poles can be
installed vertically or horizontally, on straight or curved
systems.
The entire conductor rail system can be installed indoor or
outdoor. It is insulated conforming to Current Safety Regulations.
Ground insulation cover is marked yellow-green on one side over the
entire length of the rail.
R Type: for curves R≥1200mm.
Approved and listed by: CCC, ISO9001 and CE.
Application
The ranges of applications of JDC Insulated Conductor System:
Design features
Housing:
Generally, the housing line is in green and ground line in
yellow-green. Standard length is 4m or 6m, other sections are
available.
Joints:
Snap-in joint splices provide mechanical and electrical continuity.
Insulated protection covers are included.
Feed Sets:
End feeds or line feeds are available.
End Caps:
The open ends of the conductor are closed by end caps.
Hangers:
Standard brackets for conductor attachment to crane girders are
available. Conductor is with sliding and fix point hangers.
Standard distance between suspension appoints for indoor and
outdoor installations: 1500mm to 2000mm.
Expansion Section:
The Expansion sections are required to compensate the different
expansions between copper conductors and steel-or concrete
structures, in varying temperatures without interrupting electrical
power.
Expansion joints are used when the Powerail length between feeds,
curves, switches or other fix points is exceeding 20m. Install
expansion joint according to actually installation.
Isolating Section:
Isolating sections are required if parts of the system or
individual rails are to be de-energized within a conductor rail
system. To prevent a voltage bridging by current collector two air
gap isolating sections should be installed.
Collectors:
The current collectors are made of carbon brush, reinforced nylon
and galvanized or spray-paint metal material. Spring loaded carbon
brushes maintain uniform contact. Connecting cables and hinged or
flexible towing arms included. Double Current collectors for
transfer applications and higher amperage are available.
Technical Parameters
Model | Type | Conductor material | Cross section(mm²) | Nominal current (A) | Leakage-distance (mm) | Resistance | Dimensions (H * W) | Weight(kg) |
JDC-H-100/150 | H19 | Aluminum | 100 | 150 | 35 or 80 | 0.376 | 25*19 | 0.46 |
JDC-H-160/250 | H24 | Aluminum | 160 | 250 | 45 or 80 | 0.203 | 32*24 | 0.63 |
JDC-H-180/300 | H24 | Aluminum | 180 | 300 | 45 or 80 | 0.187 | 32*24 | 0.71 |
JDC-H-230/320 | H32 | Aluminum | 230 | 320 | 80 | 0.153 | 42*32 | 0.96 |
JDC-H-285/500 | H32 | Aluminum | 285 | 500 | 80 | 0.116 | 42*32 | 1.13 |
JDC-H-360/630 | H32 | Aluminum | 360 | 630 | 80 | 0.087 | 42*32 | 1.38 |
JDC-H-420/800 | H32 | Aluminum | 450 | 800 | 80 | 0.067 | 42*32 | 1.5 |
JDC-H-550/1000 | H32 | Aluminum | 550 | 1000 | 80 | 0.058 | 42*32 | 1.83 |
JDC-H-600/1250 | H32 | Aluminum | 600 | 1250 | 80 | 0.046 | 42*32 | 2.01 |
JDC-H-700/1250 | H52 | Aluminum | 700 | 1250 | 100 | 0.043 | 66*52 | 2.58 |
JDC-H-1100/1600 | H52 | Aluminum | 1100 | 1600 | 100 | 0.037 | 66*52 | 3.65 |
JDC-H-1350/2500 | H52 | Aluminum | 1350 | 2000 | 100 | 0.028 | 66*52 | 4.32 |
JDC-H-1600/2500 | H52 | Aluminum | 1600 | 2500 | 100 | 0.018 | 66*52 | 4.99 |
JDC-H-2000/3000 | H52 | Aluminum | 2000 | 3000 | 100 | 0.015 | 66*52 | 6.07 |
JDC-H Conductor Rail System | ||||||||||
Conductor Rail Material | Aluminum | Copper | Stainless steel | |||||||
Type | H19 | H24 | H32 | H35 | H52 | H19 | H24 | H32 | H52 | H19 |
Nominal current at | 150 | 250-300 | 320-1250 | 230 | 1250 | 150-500 | 500-800 | 800-1600 | 1250-5000 | 25 |
100%DC and 35°C(A) | ||||||||||
DC resistance(Ω/km) | 0.376 | 0.203-0.187 | 0.153-0.046 | 0.153- 0.067 | 0.043- 0.015 | 0.376- 0.156 | 0.116-0.067 | 0.067-0.039 | 0.036-0.007 | 11.652 |
Impedance(Ω/km) | 0.381 | 0.209-0.195 | 0.155-0.048 | 0.155- 0.069 | 0.044 | 0.377- 0.158 | 0.118-0.069 | 0.069-0.040 | 0.038-0.008 | 11.663 |
Distance between each suspension bracket (m) | 1.5 | 1.5 | 1.8 | 1.8 | 2 | 1.5 | 1.5 | 1.8 | 2 | 1.5 |
Rail Length/PC (m) | 4.5 | 6 | 6 | 6 | 6 | 4.5 | 6 | 6 | 6 | 4.5 |
Housing Length/PC (m) | 4.42 | 5.88 | 5.83 | 5.83 | 5.75 | 4.42 | 5.88 | 5.83 | 5.75 | 4.42 |
Max. voltage (v) | 660v | Dielectric strength (kv/mm) | 30-40 | |||||||
Travelling speed | ≤600m/min | Design and Manufacturing Standard | GB7251.2-2006 | |||||||
Expansion joint | Cannot exceed 200m length | |||||||||
Flame retardant | Class B1-no flaming particles, self-extinguishing | |||||||||
Permissible Ambient temperature | Standard insulation -30°C- +70°C|High temperature insulation -20°C- +115°C|Low temperature insulation -40°C- +85°C |
Our Visison
To be the leading Integrated Solution Provider for Crane and Components
Our Mission
Not only Lift your products and business, but also help you to achieve business success.
Our Value
Profession: Observe professional ethics, abide by rules and regulations, and fulfill our duties.
Integrity: To be trustable and faithful is the code of conduct of every employee business ethics of the company
Innovation: Continuous improvements. Endeavor innovation in product and service, technology and management to deliver high value added products and services.
Win-Win: Dedicated to meet customers’ needs and satisfaction and contribute to customers’ long term success.