China Century Marine Equipment Co., Ltd |
|
Telescopic Hydraulic Crane
38KN 8M Marine Deck Telescopic Hydraulic Crane Specifications
1. Working Load 3.8T
2. Hoisting Height 30m
3. Hoisting Speed 10m/min
4. Slewing Speed 1r/min
5. Slewing Angle 360°
6. Working Radius 1.8-8m
7. Time of Arm Change 30s
8. Motor
Power 37KW
Power Source 440V, 60Hz, 3ph
Protection type IP55
Insulation type F
9. Design Condition
List
10. Painting:
Surface disposal: Shot Blast to Sa2.5:
Primer paint: 702 zinc epoxy prime 80μ(dry)
Finish paint: To be determined later
Structure
1. The crane mainly consists of pedestal, slewing support, boom and
operating stand.
2. Pedestal is a column, which is to be connected to the deck with
bolts.
3. The slewing support and oil tank are Integrated with compact
structure and small body, It is connected with the pedestal through
middle slewing bearing.
4. The boom is box-type structure , It is welded with steel plates,
Its Inside does not need maintenance.
5. The operating stand is welded beside the post, all action is to
be done on the stand.
Features and performance
1. The crane is featured with light weight, flexible operation and
easy maintenance.
2. The crane has fine performance of hoisting, slewing and luffing.
3. Hoisting, slewing and luffing are to be fully hydraulic driven
by a hydraulic motor.
4. The electric motor is mounted at the bottom of pedestal.
5. The hydraulic pump, which is connected to the electric motor
through a coupling, is mounted on the slewing bearing
6. Hoisting winch is mounted on the slewing bearing, it is driven
by a piston type hydraulic motor and it will drive the drum to wind
the steel wire to lift cargo with the help of planet gear box. The
steel wire is galvanized with no twist.
7. The slewing mechanism is mounted on slewing bearing, it is
driven by a fine piston type hydraulic motor, crane slewing is to
be achieved by means of direct engagement of internal teeth with
the output pinion of planet gear box.
8. Crane luffing is to be driven by a fine performed hydraulic
cylinder, the limits of cylinder also have the function of safe
buffering.
All the measures are indicative and can be tailored according to your requests.