|
[China]
Trade Verify
Address: 10B NO.17 HuanKe Middle Road Jin Qiao Industry Base Tongzhou District Beijing China 101102
Contact name:Tina Yu
Beijing Topsky Century Holding Co.,Ltd |
|
Verified Suppliers
|
|
|
Intrinsically Safe Laser Distance Meter/ Underground Pipe Gas Leak Detector
Applications:
LT-828 Underground Pipe Gas Leak Detector is an ideal instrument for pinpointing underground pipeline gas leaks, such as Natural gas, liquefied petroleum gas (LPG), artificial coal gas and so on. It can measure combustible gas, CO, O2, H2S. LT-828 is widely used in the department of town gas, petrochemical, oil depot, oil and gas field and so on.
Characteristic:
LT-828 Underground Pipe Gas Leak Detector is characterized by high sensitivity and good selectivity. You needn’t drill, you can detect the buried pipeline and leak point directly.
Battery: high capacity lithium battery, intelligent charging quickly, without human control, saving the cost
Sensor and the air pump: The most advanced one in the world
anti-interference, low temperature resistant, high stability.
Voice Alerts:
It changes according to gas concentration. You needn’t observe display. Then work efficiency has been improved.
The gases from dozens of meters could be inhaled into the included getter pump instrument and then detected.
It has a self-inspection to display, battery, sensor and acousto-optic alarm function while started or needed.
key technical indicators
Detecting gas: suitable for natural gas, liquefied petroleum gas, artificial gas.
Detecting gas type: combustible gas, carbon monoxide, oxygen, hydrogen sulfide
Sensitivity: in 0~1000ppm, it is better than 50ppm; in 1~100%LEL, it is better than 1%LEL
Detection range: 0~1000ppm, 1-100%LEL (automatic)
| Gas | Range | Accuracy |
| CH4 | (0.00~1.00)% CH4 | ±0.10％CH4 |
| (1.00 ~3.00)% CH4 | ±10％ | |
| (3.00～4.00)% CH4 | ±0.30％CH4 | |
| O2 | (0~30)% O2 | ±3.0% |
| CO | (0~100)×10-6 CO | Less than ±(1.5+2.0%) |
| (100~500)×10-6 CO | Less than±4.0% | |
| >500×10-6CO | Less than10.0% | |
| H2S | (0~49)×10-6 H2S | ±3×10-6 H2S |
| (50~100)×10-6 H2S | ±10％ |
Technical Specification:
| Detection Range | 0-1000ppm | intrinsic error | ＜±3%(F.S) |
| warm-up time | 10s | Minimum Reading | 1%LEL |
| Sensor life | 36 months | Battery run | 15 hours |
| Response Time | ＜10s | Batteries | 4400mAh 7.4V |
| surrounding air speed | ＜2m/s | Gas flow | 1L/min |
| dimension | 180mm×110mm×80mm | Weight | 1kg (with charger) |
