|
[China]
Trade Verify
Address: Jingyijin Machinery No.22,Chang Hong Chang Ban Keng Bei industrial West Street, JiaheTown, Baiyun District, Guangzhou city, China.
Contact name:Auli
Guangzhou Jingyijin Machinery Equipment Co., Ltd |
|
Verified Suppliers
|
|
|
Description:
The heating mixing lipstick drum is used to heat the raw materials by compartmentalized heating, which increases the heating area of the raw materials and effectively controls the heating temperature of the raw materials. Adopting speed-regulating motor, it can effectively control the mixing speed. It has the advantages of easy cleaning, high efficiency and wide application range.
Technical Parameters:
Drum capacity | 100L |
Power source | 380V/50HZ |
Power | 4KW |
Mixing speed range | 0-200r/min |
temperature range | 0-140℃ |
| Overall dimensions | 750x950x1750MM |
Uses Directions:
A. Power switch: turn on or off the power of the machine.
B. Drum temperature control switch: turn on or off the power of
drum heating circuit.
C. 24-hour relay: it can be set to energize the machine at a
certain time and disconnect it at a certain time. For example, it
can be automatically heated one hour in advance before going to
work in the morning.
D. Discharge port temperature control switch: turn on or off the
power supply of the discharge port heating circuit.
E. Stirring motor speed control: control the stirring speed and
switch of the stirring motor.
F. Message display: PV (red) shows the system measured value that
is the actual temperature, SV (green) shows the system set value
that is the set temperature.
G. OUT indicator: input indicator that heating indicator; AT
indicator: PID automatic algorithm indicator; ALM1 indicator: Alarm
1 indicator; ALM2 indicator: Alarm 2 indicator
H. SET key: setting, mode key, press this key can enter or
exit the temperature and other parameters of the setting; ▼ key:
reduce key; ▲ key: increase key; ← key: cursor movement key, press
this key to move the number of digits need to modify the value.
I. Time relay: control the filling time.
Uses Precautions:
A. Please do not turn on the stirring motor when the ingredients
are not melted.
B. When the mixing drum is heating, please do not touch the drum to
prevent burns.
C. Please clean it after use, so as to avoid unstable and
indefinite quantity failure in the future.
D. When adding raw materials, please do not exceed 70% of the
volume of the barrel, to prevent the raw materials from spilling
out when heating and mixing.
E. Stirring speed is too fast raw materials may produce bubbles.
Packing:
