Active Member
|
[China]
Address: No.717B, 2th Building,Tian An Cyber Park, No.1 Jian Ping Road, Guicheng, Nanhai
Contact name:Christina
Liyuan Technology (Guangzhou) Co., LTD |
|
|
GT15 Chemical Resistant Plastic Air Operated Pneumatic Double Diaphragm Pump
Product Parameter:
| GT15 Plastic Pump Specification | Wetted Part Material Polypropylene: 4.2KG Polyvinylidene fluoride : 5.3KG |
| Max. Flow Rate | Rubber diaphragm: 57.0 LFM TP diaphragm: 57 LFM Teflon FTFE: 53.6 LFM |
| Diaphragm Material | Teflon, Santoprene EPDM NBR Viton |
| Max. Suction Lift | Rubber: Dry 6.3 M / Wet 9.55 M Thermoplastic compound TP : Dry 6.3 M / Wet 9.8 M Teflon FTFE: Dry 5.5 M / Wet 9.85 M |
| Parameter | Liquid inlet: 1/2” Liquid outlet: 1/2" Air inlet: 1/4” Max. inlet pressure : 8.62 BAR (125 PSI) Max. size solids: 1.6 mm (1/16") |
Working Principle
This series of diaphragm pump is a positive displacement pump that uses a combination of the reciprocating action of a diaphragm together with suitable valves on either side of the diaphragm in order to pump liquid. There are two diaphragms connected with each other by a shaft working in a separate chamber along with two sets of inlet valve balls and outlet valve balls. The diaphragm will separates the pumping action (liquid chamber) and air supply action (air chamber) individually. The reciprocating action will be powered by the air valve function which is shifting the air into either side of the air chamber systematically.
Thus, the pumping action is generated when air pushes into separate chamber acting on the diaphragm one after another. The pair of inlet and outlet valves will complete the pumping action with designated path direction.
NOTE: The diaphragm's lifespan will be extended because of the air acting evenly onto the diaphragm instead of high mechanical stress on shaft connector area if it depends on the shaft to create the reciprocating action
