HEBEI SOOME PACKAGING MACHINERY CO.,LTD |
Verified Suppliers
|
|
1. Product overview:
Automatic vacuum adsorption feeding, save labor, also can prevent paper run inclined. No need manual feeding assured the workers safety. The more shafts thin blade slitter scorer adopt two shafts in front and back of the slitter, can minimize the length of paperboard, is suitable to the common paper and the small baffle paper. Electrical adjustment of the blades work width, automatic locking, improved the working efficiency.
2. Technical index:
Model | 1600 | 1800 | 2200 | ||
Efficient width | 1650mm | 1850mm | 2250mm | ||
Min. slitting width | 120mm | ||||
Min. creasing width | 30mm | ||||
Blade model | Φ200*122*1.3mm | ||||
Creasing roller model | (up)φ152mm(down)φ152mm | ||||
Correction range | ±100mm | ||||
QTY of blade/scorer | 4/6 | 5/8 | 6/10 | ||
Depth of creasing | 0-12mm | ||||
Design speed | 80 m/min | ||||
Power | 4kw | 5.5kw | 7.5kw |
3. Main configuration:
1. Can set processing paper qty, automatic stop the feeding after finishing.
2. Suitable to the long paper slitting creasing.
3. Electrical adjustment of the slitting blade work width, automatic locking, dual guide shafts, dual locking air cyliner, steady running, easy to adjust. Has the inlay o-ring seal, dust-proof, reduce the failure rate.
4. Slitting part: adopt high quality tungsten steel blade, sharp and long work-life, slice more tidy, non-pressing and non-burr.
5. Adopt eight rolls, two roll-rang feeding, then scoring ,easy to adjust. It can do slitting only without scoring, avoid error conveying when scoring later. Can choose automatic or manual sharpening of blade.
4. Main function :
Electrically adjust the working distance of the longitudinal cutter to lock automatically.
Alloyed steel thin-blades,sharp and long life of over million meters ,auto sharpening.
Scoring part: adopt 5 points scoring, scoring distance in-phase adjust, blazonry and easy to bend the carton sheet.
Motorized body left-right rectification 200mm.
5. Slitting Department:
Thin knife slitting creasing machine adopts thin knife
slitting, after grinding wheel after sharp blade makes cutting the
cardboard edge finishing, flattening phenomenon is minimal, improve
quality and appearance of cardboard overall quality especially in
favor of cardboard printing after feeding, thereby reducing waste,
improved quality of the carton.
Sharpener with manual and automatic switching of two ways,
according to the time or paperboard running speed selection
sharpener and stop grinding time. To keep the blade sharp and make
cardboard cut smooth and tidy;
Adjust the blade from electric, pneumatic automatic locking
fixation. Manually adjust the pressure line width. Using separate
single-handedly carrying knives structure, according to the number
of cardboard cut switch; program the machine wear and tear caused
by different cutter size can be adjusted.
Features: The plastic shaft feed, after cutting, and then plastic
shaft feed, the last pressure line forming, after the process used
when the clear indentation depth of cut paper with high steel knife
blade drive belt drive, when replacing blades can be quickly set up
for using plastic shaft pull paper, pull the paper toward the same
equipment than the one higher than a chip.