HEBEI SOOME PACKAGING MACHINERY CO.,LTD |
Verified Suppliers
|
|
SOOME Flexo Printing Machine Pneumatic Ink Circulation Diaphragm
Pump
Description:
Pneumatic diaphragm pump is a new conveying machine, which is the
latest novel kind of pump. Compressed air as the power source, it
can be use in any corrosive liquid, liquid with particle, high
viscosity, easy volatile, inflammable, highly toxic liquid.
There are four materials in Pneumatic Diaphragm Pump: plastic,
aluminum alloy, cast iron and stainless steel. The diaphragm pump
will adopt Buna-N rubber, Chloroprene rubber, fluororubber, PTFE,
according to the different liquid and to meet customers’ need.
Place in all kinds of special occasion; use to pumping the medium
which the general pump cannot do so. And it is gain a satisfied
effect.
Thus the above features that pneumatic pump possessed, this kind of
pump is gradually invaded other pump market when it is born and
cover a part of it. Such as painting, ceramic industry, printing
industry, the pneumatic pump has an absolute dominant position.
Features:
1. Because it is using air as power, the diaphragm pump does
not heat and produce sparks; suitable for use in flammable and
explosive environment.
2. Use PTFE diaphragm, can be used for chemical properties
relatively volatile liquid, corrosive medium.
3. Diaphragm Pump can pump particle liquid;
4. The liquid can be conveyed by diaphragm pump is wide, the
viscosity from low to high, from corrosive liquid to viscous
liquid.
5. Diaphragm Pump is small, light and easy to move.
Used for water-based ink printing machine, gravure printing, flexo
printing and composite glue machine and the liquid with particle, all kinds
of the cycle of flammable liquid delivery system.
Accessories:
1. Inlet or outlet PV Tube: 2m(Respectively)
2. A strainer set
3. A G shaped fixation clamp
Usage Machine feature:
The main electric elements all adapt French Schneider brand.
Name-brand PLC controlling, colorful touch screen , frequency
converter.
The transmission gear adopt 40 Cr, 20GrMo Ti high quality alloy
steel which is grinded, and after the heat treatment ,it can up to
six grade precision.
The machine lubrication system uses an automatic spray lubrication,
and with the device impermeable to oil spills institutions.
Each unit of the machine with electric separation, and pneumatic
locking, pneumatic total lock, to ensure the stability of the unit,
and continue ring for caution when machine be separated, to ensure
the safety of operating person.
Every unit of machine with emergency stop switch, so the machine
can be stopped between the unit, it can ensure the workers safe
(remark: every unit moving is drag by feeder unit
Main parameter
Model | Unit | all type carton printing machine |
Plate roller diameter | mm | ¢300/380/420/500 |
Speed | pcs/min | 110-220 |
Board thickness | mm | 2-12 |
Print plate thickness | mm | 7.2 |
Print roller axle circle-oriented regulating | degree | 360°revolving |
Topping precision | mm | ±0.5 |
Printing unit:
1. Printing of high quality thick-walled seamless steel roll,
surface conditioning, grinding, hard chromium plating.
2. All axes of roller correct by dynamic balance, the machinery
running steady.
3. Handling print, the foot switch is convenient and
flexible electric control reversing.
4. Printing , roller clearance adjusted by hand, the scale panel
shows the data.
5. Printing phase fixed device, using pneumatic brake mechanism.
While the machine separates or the phase is adjusting, the brakes
can restrict the revolving of the machine platform and keep the
fixed point of original gears position.
6. roller diameter Φ300mm, diameter with printing plate Φ312mm,
adopt high quality thick seamless steel pipe, with surface
grinding, hard chrome plating.
7. Use famous Dalian Tengda anilox roller, high quality steel, mesh
is 220LPI or 250LPI as per customer need.
Rubber roller adopt high quality wear / oil and acid-base
resisting, medium height grinding, better ink distribution effect.
8. The printing roller pressure adopt high precision crosshead shoe
gapless adjustment to do micro adjustment, can make the printing
pressure reach the best condition.
After-Sales Service:
Q1. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the
photos of the products and packages before you pay the balance.
Q2. What is your terms of delivery?
A: DHL, TNT USP etc.
Q3. How about your delivery time?
A: Honestly, it depends on the order quantity and the season you
place the order. The lead time of MOQ is about 10 to 15 days.
Generally speaking, all of the goods can be reach your address
within 4 weeks.
Q4. Can you produce according to the samples?
A:Yes, we can produce by your samples or technical drawings. We can
build the molds and fixtures.
Q5. What is your sample policy?
A: e can supply the sample , but the customers have to pay the
sample cost and the courier cost.