HRB-920 HIGH DEFINITION 04 COLOR PRINTER SLOTTER DIE CUTTER
FEEDER
* Servo motor drive brand BOSCH REXROTH
from Germany
*Lead edge feeder with strong
vacuum transfer for precise and stable feeding;(made from
guangdong province)
* Frequency conversion adjustment
vacuum negative pressure value, can adopt to different
cardboard specification and curved
cardboard.
* Dust remove system with brush and
segmented vacuum sheets cleaner
*Motorized backstop forward
/backward and up/down position for easy and quick adjustment;
PRINT UNIT
*Adopt
ceramic roller and doctor blade for high definition printing
quality
*Mounting
roller with left and right both of side locking device, let the
mounting position
more accurately
*Pneumatic
clutch is adopted on the anilox roll to:
Make the roll run at the same
speed as the main motor when the unit is printing;
Make the roll stop when the unit
is not printing;
Reduce the possibility of damage
to the rubber roll and the anilox roll for in proper
operation;
Allow units which are not in use
to be washed up while running.
*Quick set and self locking pull
collars.
*Cleaning function can be automatically
switched to ensure the ink recycling thoroughly
SLOTTER UNIT
*Single shaft five
blades slotting ,an internal gear adjusts the height of the carton
box and
prevents the
lubricating oil from spilling or leaking onto the cardboard
*The first
pre-creasing, the cardboard not be damaged after pre pressing.
*Slotting bosses
move along liner lead rails and are driven by lead screws for
flexible and
precise movement.
*Upper boss and
lower boss are coupled to keep the two knives aligned while
moving,
which is helpful to prolong service life.
*Transversal
movement of the pre-creasing rolls, and slotting bosses’ are
digital controlled
by motor and PLC
*Flexible angle
cutting knife can cut 3 or 5 or 7 ply cardboard with no adjustment,
easy to
operate.
DIE CUTTER
*With
separate servo motor.
*Side
to side oscillation of anvil drum(45mm)
*The die
drum’s transverse movement can prolong the service life of anvil
cover.
*Die-cutting register is digitally controlled by motor and PLC
*The
die-cut cylinder lateral register is digitally controlled by motor
and PLC, rang
about±10mm
*Motorized caliper adjustment between anvil roll and
die drum.
*Auto
speed compensation system controlled by the independent motor can
achieve the
superb die
accuracy.
*Anvil
rubber roller speed compensation adopted independent motor for
driving to control
the rubber roller
speed, the compensation scope is ±3mm.
*Anvil
cover is Depride made from Germany
